maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E36 (1991 - 1999) (http://www.maxbimmer.com/forums/forumdisplay.php?f=59)
-   -   Rotted out rear trim panel. (http://www.maxbimmer.com/forums/showthread.php?t=146173)

limenuke 10-03-2011 06:23 PM

Rotted out rear trim panel.
 
Can anyone recommend a place to do this job? I need a spot weld cut and another good shape panel welded in. I don't care about paint (I'll do it myself, hell I can even provide the part). I don't want anything besides the cut and weld.

RMP wouldn't do it and reccomended me to another body shop which has closed for today. I don't like to go far if I can help it so somewhere in Toronto or Waterloo/Kitchener/Cambridge would be ideal.


http://i.imgur.com/z6qrQ.jpg

5style 10-03-2011 06:32 PM

Look for a new panel.they arent too much, and it will be peice of mind. When you reinstall the seal, put the joint else where like on top as moisture likes to drain into it when it sits at the bottom and well, rot

5style 10-03-2011 06:33 PM

Also new seal, don t reuse the old

limenuke 10-03-2011 07:52 PM

That's a new seal. Got rid of the old one. The rotting was there long before the new seal.

Good idea. Do you know anywhere which will actaully do this panel for me?

5style 10-03-2011 07:54 PM

Pm drflyview he had it done before

limenuke 10-04-2011 04:51 PM

He doesn't actually have a shop he says he'd reccomend. Anyone else?

ismail 10-04-2011 05:15 PM

Autobody Shop
 
Go to the Bodyshop Rocco recommended.....super reasonable and very nice guy....also looking for business so he's very accomodating. I believe his name is Jag.

limenuke 10-04-2011 09:19 PM

I plan on visiting. But after jacking up my car today, I found out that the front driver side jack point is starting to fail which is making me highly unconfident.

I need a person who can weld stuff quick and dirty. I'll take care of grinding, the body work and I'll tear everything down so that the welder/workers won't have to do much. But I don't have any tools to do any of that stuff...

In short - I need a new trim panel and a rocker panel/jack point cut and welded onto my car for as cheap as possible. Who can do this?


All times are GMT -4. The time now is 04:30 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.