maXbimmer Forums

maXbimmer Forums (
-   Other BMW Parts (
-   -   E46 FS: 10 mm Rogue Engineering spacer - 2 piece (

blue dragon 09-10-2011 02:33 PM

FS: 10 mm Rogue Engineering spacer - 2 piece
With a normal 10mm spacer, there isn't enough lip to support the centre bore of a wheel in a hubcentric design. RE fixed this by designing a 2 piece spacer. Centre bore is 72.5mm

The small piece extends your hub so that the wheels remain hub centric and the hub carries the load, not the wheel lugs. The edges are chamfered, so you can pry them off without getting them stuck to the hub.

I can't use these anymore since the X5 ix 74.1 centre bore. These will fit E46 with the exception of the E46 Xi I think. Price is $80 and includes the longer bolts. PM me or email me wiward(at) if interested. They are a little bit dirty, but I know you guys can clean them up :p

They fit like this[/QUOTE]

Quickid 09-11-2011 08:10 AM

Will the hub extender work on the rear hubs?

I need something like this for the rear but all hub extenders I see on the web says it's designed for the front only.

blue dragon 09-11-2011 09:25 AM

I think this is for the front only, but you are welcome to try it. You can stop by my place and try it to see if it fits.

Stirlitz 01-04-2012 09:17 PM

Are they still available?

blue dragon 01-05-2012 05:17 PM

These were sold awhile back

All times are GMT -4. The time now is 12:24 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018