maXbimmer Forums

maXbimmer Forums (
-   Wheels&Tires (
-   -   DIY: Refinishing Steel Rims (Video) (

ProStreetDriver 07-29-2011 05:56 PM

DIY: Refinishing Steel Rims (Video)
How to refinish steelies on a budget. This involves repainting your rims using spray bomb/rattle cans.

What you'll need:
flat screw driver, paint marker, wire brush, 200-400 grit sandpaper, brake cleaner, clean cloth, painter's tape, paper, dull knife/flat edge, primer, paint (color choice)

-remove rims from vehicle
-mark where wheel weight are located with paint marker
-remove loose rust and paint using wire brush
-sand down rim using 200-400 grit sand paper
-clean rim using brake cleaner and cloth, then let dry off in sun
-tape off tire and valve stem
-primer rim and allow for approximately 10min dry time
-apply selected paint choice (3 coats)
-let paint dry and remove tape
-reinstall wheel weight
-reinstall rim on vehicle

All times are GMT -4. The time now is 06:31 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018