maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E46 (1998 - 2005) (http://www.maxbimmer.com/forums/forumdisplay.php?f=60)
-   -   Angel Eyes (http://www.maxbimmer.com/forums/showthread.php?t=144384)

Jolubzo 07-17-2011 12:41 PM

Angel Eyes
 
Is there any place that does a good job installing angel eyes on e46?

Renboy 07-17-2011 01:29 PM

It's not really rocket science. Anyone with basic hand tools and basic hand eye coordination can install them. I suggest you try to install them yourself and if by some reason you fail, then pay to have them installed. Worst case scenario, it takes you 2 hours to install them instead of 40min. for someone that's done it before.

Jolubzo 07-17-2011 01:54 PM

i know what you mean, but im 16 so I don't wanna be messing up if anything. I'm just slowing learning but i will try to attempt it myself and see how it goes

Renboy 07-18-2011 08:42 AM

As long as it's not a facelifted coupe you'll do fine, which I see your xi isn't.

Surk 07-18-2011 03:16 PM

Here you go..pretty simple if you take your time...*th-up*

http://www.fastm.com/m3/angeleyes_chromium.html

330ci05 07-25-2011 02:43 PM

Give Richard a call 4168814607, did mine two years ago on my facelift. no problems to date!

steve.325i 07-25-2011 11:21 PM

Quote:

Originally Posted by Surk (Post 1513573)
Here you go..pretty simple if you take your time...*th-up*

http://www.fastm.com/m3/angeleyes_chromium.html

This is the same DIY I followed when I did mine a couple years ago.

2000BMW323i 08-25-2011 09:27 PM

how much was it to install

lucad2 08-29-2011 09:53 PM

Quote:

Originally Posted by Jolubzo (Post 1513430)
i know what you mean, but im 16 so I don't wanna be messing up if anything. I'm just slowing learning but i will try to attempt it myself and see how it goes

I'm 18 and installed them myself on my 05 m3, wasn't hard at all

SpeeDemoN 08-30-2011 09:17 AM

I don't really know what age has anything to do with installing something or messing something up.

You either have a brain, basic tools, and are able to control your arms hands and fingers or you don't.....

cormier 08-30-2011 10:50 AM

Good sense for not wantin to mess stuff up tho :)

spooner_dee 09-05-2011 03:46 PM

Easy peasy

http://www.youtube.com/watch?v=gwgYvEu7atY


All times are GMT -4. The time now is 01:29 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.