maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Forced Induction (http://www.maxbimmer.com/forums/forumdisplay.php?f=97)
-   -   unloading turbo m20 stuff (http://www.maxbimmer.com/forums/showthread.php?t=140021)

d.maczko 01-24-2011 09:22 PM

unloading turbo m20 stuff
 
I am planning an engine swap so all of my m20 turbo stuff will be for sale.

I have a running turbo car, so everything you could imagine for a running car.

ebay manifold modified for 38mm external waste gate
ebay intercooler 24x12x3
3" downpipe with provision for waste gate to dump
holset h1e 18^cm3
-4an feed line, -10an drain line
welded oil pan for turbo drain
fittings for oil feed from pressure port on block
black powder coated charge piping and couplers
HKS ssqv bov
MS 2.2 with waste spark, GM coils, MSD wires
boost, oil press, water temp, egt pro sport gauges
.140 MLS headgasket
metric blue head bolts

would like to sell as a whole but will part out most likely
all parts are still on the car but will take apart as stuff sells
dont be afraid to pm me to ask anything

d.maczko 01-26-2011 02:22 PM

I am planning an engine swap so all of my m20 turbo stuff will be for sale.

I have a running turbo car, so everything you could imagine for a running car.

ebay manifold modified for 38mm external waste gate. 350
ebay intercooler 18x12x3 80
3" downpipe with provision for waste gate to dump 100
holset h1e 18^cm3 300
-4an feed line, -10an drain line 80
welded oil pan for turbo drain 250
fittings for oil feed from pressure port on block 10
black powder coated charge piping and couplers 100
HKS ssqv bov 25
MS 2.2 with waste spark, GM coils, MSD wires 300
boost, oil press, water temp, egt pro sport gauges 120
.140 MLS headgasket 100
metric blue head bolts 40

would like to sell as a whole but will part out most likely
all parts are still on the car but will take apart as stuff sells
dont be afraid to pm me to ask anything

edit: will be adding more parts later today

I should mention the MS is a plug and play unit made by rs4pro
all you need to do is wire up the IAT

few other parts
B&M oil cooler, SS lines and nec fittings to use with factory oil filter housing 250
adjustable FPR, bolts into stock fuel rail, looks identical to stock unit. 50

http://img.photobucket.com/albums/v1...s/P1020474.jpg
http://img.photobucket.com/albums/v1...s/P1020475.jpg
http://img.photobucket.com/albums/v1...s/P1020476.jpg
http://img.photobucket.com/albums/v1...s/P1020477.jpg
http://img.photobucket.com/albums/v1...s/P1020478.jpg
http://img.photobucket.com/albums/v1...s/P1020479.jpg
http://img.photobucket.com/albums/v1...s/P1020480.jpg
http://img.photobucket.com/albums/v1...s/P1020481.jpg
http://img.photobucket.com/albums/v1...s/P1020482.jpg
http://img.photobucket.com/albums/v1...s/P1020483.jpg

d.maczko 01-26-2011 02:25 PM

http://img.photobucket.com/albums/v1...s/P1020484.jpg
http://img.photobucket.com/albums/v1...s/P1020485.jpg
http://img.photobucket.com/albums/v1...s/P1020486.jpg

hazy 03-18-2011 05:33 PM

You have PM

DIY 04-13-2011 12:28 AM

PM'd

iverson03tj 05-10-2011 10:54 AM

pmed

d.maczko 05-15-2011 06:34 PM

all parts are out.
MLS and metric blues not available.
Also injectors are gone and oil feel/drain lines gone.

heres the new bay picture:
http://img.photobucket.com/albums/v1...M/P1020494.jpg

Yamahammer 06-09-2011 05:55 PM

pm'd

chapellej 07-06-2011 10:27 PM

that looks like a 2jz engine..........

d.maczko 07-18-2011 10:37 PM

you would be correct.

I find myself having less and less time to work on it and get it running though. :(

The Twin 02-02-2012 11:04 AM

interested in HKS SSQV and a couple other things...can't seem to be able to PM you.
please contact me via PM

flex 54 02-09-2012 09:46 PM

Hi Send me your contact info flexr23@hotmail.com

flex 54 02-12-2012 07:32 AM

must not be check e-mail???

xmedina 02-19-2012 02:54 PM

very intrested in MS email me at xmedina9705@yahoo.com


All times are GMT -4. The time now is 04:27 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.