maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Detailing & Care (http://www.maxbimmer.com/forums/forumdisplay.php?f=98)
-   -   omg .. does this really work? (http://www.maxbimmer.com/forums/showthread.php?t=139353)

Blades 12-21-2010 06:33 PM

omg .. does this really work?
 
I can fix dents for $8 if its true.

http://www.youtube.com/watch?v=E2Mn3...layer_embedded

http://www.youtube.com/watch?v=jCidR...eature=related

Marky_mark 12-22-2010 12:45 AM

This will not work I wouldn't try this on my car. This is a bad way to have dents removed from your car
http://www.youtube.com/watch?v=07eM0...eature=related

Blades 12-22-2010 01:13 PM

ya i seen some fail video results .. hmm.

MaxBell 12-22-2010 04:43 PM

The problem is, you greatly risk damaging your paint. The other issue is that the dent is just popped out because of the sudden temperature change. Once the dent reaches normal temperature again, it will start to sink back into being a dent. Not as bad, but still a dent.

Ceeker 12-22-2010 05:03 PM

It will work some of the time; notice the when and where and how it was done. Too much heat could damage paint; you have to have some finesse when doing it. Like polishing a car. You can have all the products and machinery but if you don't have skill, what good is it? So there is some common sense, some understanding and well bottom line some plain luck. Steel, is one thing but aluminum is another. A shallow dent with minimal creasing should work. But if it does with more creasing you will probably still see evidence a dent was there as mentioned. what is there to lose at 8 bucks a can?? (grin) heck I'd try it..

crxgsr 12-22-2010 07:12 PM

This video is a better example.
http://www.youtube.com/watch?v=ILVWPzO_swY


All times are GMT -4. The time now is 10:09 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.