maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Exhaust Parts (http://www.maxbimmer.com/forums/forumdisplay.php?f=173)
-   -   FS: E46 Headers - stainless steel BNIB (http://www.maxbimmer.com/forums/showthread.php?t=134925)

EMPOWERD 07-07-2010 05:08 PM

FS: E46 Headers - stainless steel BNIB
 
3 Attachment(s)
Selling brand new stainless steel headers for your '99-'05 BMW 3-Series or Z4. Will fit 2.5L, 2.8L & 3.0L motors. NOT E46 M3!!

*Headers made with stainless steel ss304 and with mandrel bent tubes.
*Bolt-on Application for HP +Torque Gains, approximately increase 15-20 hp and torque.
*High quality flanges assures proper fitment without leaks common to slip-on styles.
*One-piece manifold flange for tighter gasket seal.
*2-Piece 6-2-1 design for easy install and smooth flow.
*Includes bolts, bungs and gaskets as shown in picture.
*100% Brand New, never used.
*Direct bolt-on installation
*Pipe O/D: 42MM, pipe thickness 1.5MM, flange thickness 12MM

$450.00
Local pickup only.
Email for quickest reply mmm_pwr@hotmail.com

rider-. 07-07-2010 05:38 PM

they wont fit both the m54 and m56 direct bolt on. Its either or. the exhaust flange is positioned differently for m56 motors such as the m56 2.5 litre and the 2.8 litre. everything from the manifold to the collector are the same but then the pipes change in length and the o2 sensors are also positioned differently. However, they can be made to fit at an exhaust shop for cheap.. the headers pictured actually seem to be the ones for the m56 so you would have to get them converted to work for the m54.

One more question. Are these the same supersprint replicas found on ebay??

EMPOWERD 07-07-2010 05:51 PM

Right, I guess they're M54 headers... the description I got is what I wrote, so i'm sorry if it wasn't totally correct.

If they were "real" Supersprints, I wouldn't be asking $450.00 for them. I don't know who makes them.

arsevader 07-07-2010 07:34 PM

Quote:

Originally Posted by rider-. (Post 1434869)
they wont fit both the m54 and m56 direct bolt on. Its either or. the exhaust flange is positioned differently for m56 motors such as the m56 2.5 litre and the 2.8 litre.

No such thing as m56 2.8 litre. Only 2.5 and you won't find an M56 north of the border unless someone imported it but you'd be insane to do that.

rmanaudio 07-08-2010 08:31 AM

How do you pass emissions with these? Im guess you will need high flow cats which are big bucks and that will probably still light up the dash?

Quack 07-08-2010 11:16 AM

Quote:

Originally Posted by rmanaudio (Post 1435014)
How do you pass emissions with these? Im guess you will need high flow cats which are big bucks and that will probably still light up the dash?

you should pass emission no problem, and you don't need high flow cats, even if you do, they're not big bucks, and it shouldn't turn on the check engine light.

98323IS 07-08-2010 05:18 PM

How many of these do you have?

EMPOWERD 07-08-2010 05:33 PM

Just the one set. Call me if you want more info.
(416) 578-8040
Randy

Another BM 07-08-2010 10:10 PM

Quote:

Originally Posted by Quack (Post 1435044)
you should pass emission no problem, and you don't need high flow cats, even if you do, they're not big bucks, and it shouldn't turn on the check engine light.

You wont pass emissions with these headers.. They have no cats

propr'one 07-08-2010 11:35 PM

uhh, since when do e46's have precats in the headers?

Free bump for randy.

B6T 07-09-2010 12:36 AM

^ Aren't the cats built into the headers? I thought it was like this on my 330Ci...

Another BM 07-09-2010 06:21 AM

yeah the cats are built into the headers on all e46's


All times are GMT -4. The time now is 12:30 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.