maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Audio/Sound (http://www.maxbimmer.com/forums/forumdisplay.php?f=35)
-   -   Pls. help problem with JVC, KD-AVX40 deck (http://www.maxbimmer.com/forums/showthread.php?t=128989)

Pit-E36sedan 01-17-2010 08:05 PM

Pls. help problem with JVC, KD-AVX40 deck
 
I just install deck replacing stock deck in my E36-1997-3.28 sedan and here are the issue:

1. No picture during playing DVD but it's reading and same thing with playing mp3 on the disk.

2. Can i bypass the connection from the e-break? And where to connect.

I'm wondering if this may be the reason why because i did not connect the wire to the e-break instead jump with remote wire but the FM radio is work fine.

Hope to hear from you guys thanks.

propr'one 01-17-2010 08:26 PM

AFAIK the e brake is ground, not positive. Try grounding it out instead, should work.

Pit-E36sedan 01-17-2010 09:28 PM

Thanks for the reply but what do you mean by "grounding it out" connect the e-bbreak wire to the ground? I'm sorry i just wanna make sure if i understand it right. CAn you explain in detail if you don't mind.

tg07lq 01-17-2010 11:17 PM

connect it to some thing that doesnt send electricity like the remote line does. connect it to the black wire in the harness or to a metal piece under the dash thats connected to the car body, sand any paint at the connection also

propr'one 01-18-2010 04:27 AM

Connect the lead from the HU that you would normally attach to the e-brake lead to a ground point (negative) IE. Negative battery terminal, any exposed part of the frame, etc.

Pit-E36sedan 01-18-2010 05:29 PM

Thanks guys for your support... problem was resolved and it works.


All times are GMT -4. The time now is 08:57 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.