maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   5 series (http://www.maxbimmer.com/forums/forumdisplay.php?f=61)
-   -   Where should i go to fix this? (http://www.maxbimmer.com/forums/showthread.php?t=127591)

Dado 540 11-25-2009 11:24 PM

Where should i go to fix this?
 
3 Attachment(s)
The photos speak for themselves...

Affected area
Attachment 93825

Close up
Attachment 93826

Damage:(
Attachment 93827

Can anyone suggest where i should go to get this fixed?

Eurostyle 11-25-2009 11:30 PM

Did you get hit by lightning!!!? Looks like the molding is melted! My guess would be any auto glass place. I think you have to remove the glass to replace the molding on the E39...And that job can be a rear b#tch!

Dado 540 11-25-2009 11:37 PM

Im not sure what happened. That corner is just dried up that it crumbles if you touch it.

tg07lq 11-26-2009 12:01 AM

my e36 is terrible. im also in need of this advice

Dado 540 11-27-2009 06:48 PM

Stopped by Apple Auto Glass. The guy says that the water can not leak in as the real seal in under the glass about half an inch from the exposed rubber.

Roughly it would cost around $300 to get the job done.

hustler 11-28-2009 12:55 AM

I have the same issue. Good to know its no biggie. Maybe black caulking carefully applied might close up the unsightly gap?

speedemn 12-06-2009 02:10 AM

I have had great windshield work done at Go Glass in Waterloo... if you cannot find a place locally that is... let me know.


All times are GMT -4. The time now is 06:12 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.