maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Wheels and Tires (http://www.maxbimmer.com/forums/forumdisplay.php?f=154)
-   -   staggered E39 Style 32's for sale (http://www.maxbimmer.com/forums/showthread.php?t=127501)

sanjee328i 11-23-2009 01:49 PM

staggered E39 Style 32's for sale
 
3 Attachment(s)
These rims are in mint condition, never been refinished. Rims do not come with tires. Rims are 17x8 and 17x9 in the rear, i am not sure about the offset but were recently on my e39 540i. message me and we can arrange a meet somewhere for u too see them. i do not have a set price so please make an offer and if reasonable we can go further.

Dr. Flyview 11-23-2009 02:03 PM

Mine. We need to see if we can get them to fit. [Paging Mystikal!] What tires are on them? I wish they were e36 offset I don't wanna run skinny tires.

sanjee328i 11-23-2009 02:09 PM

255/40/17 on the rear and 235/40/17 on the front

Mystikal 11-23-2009 02:23 PM

Quote:

Originally Posted by Dr. Flyview (Post 1368329)
Mine. We need to see if we can get them to fit. [Paging Mystikal!] What tires are on them? I wish they were e36 offset I don't wanna run skinny tires.

215s and pulled fenders.

Dr. Flyview 11-23-2009 03:23 PM

+hubcentric rings? By pulled fenders, do you mean the inner lip of the fender where it curves in or will my fenders actually flare out more than the normal e36 body?

dru2 11-23-2009 04:07 PM

I'm guessing rolled fenders with 215/45/17 and 245/40/17 tires wont work?

OR WILL IT?

:)

sanjee328i 11-23-2009 04:41 PM

hubcentric rings are a must if you want to put these on an e36,
they will run about $30 to $40 for all 4.

Mystikal 11-23-2009 05:30 PM

No, they will not work with just rolled fenders. My 18x9s have a very similar offset in the back and the WHEEL rubbed. My arches are pulled over a cm and it's still extremely close. And this is with 215 tires.

Dr. Flyview 11-23-2009 06:36 PM

How do you pull it and still make it fit with the bumper, trim, etc? Actually come to think of it most e36 bumpers stick out a lil bit at the tip where they meet the fender anyway...

What can you comment on the traction on 215s stretched vs. something like 245s? Only noticeable at the track?

zubbie 11-23-2009 06:42 PM

nice rims in great shape. must resist temptation to buy yet more rims. Glad I am not local.

Mystikal 11-23-2009 07:32 PM

Quote:

Originally Posted by Dr. Flyview (Post 1368446)
How do you pull it and still make it fit with the bumper, trim, etc? Actually come to think of it most e36 bumpers stick out a lil bit at the tip where they meet the fender anyway...

What can you comment on the traction on 215s stretched vs. something like 245s? Only noticeable at the track?

You're only flaring out the top section. You gradually fade the flare back to the stock 90 degree line. Even on track the difference isn't that big, I ran laps on my 18s then switched to 235/40/17s on my track wheels, the grip difference isn't as large as people make it out to be.

Completely apologize to the OP for posting all of this in the FS thread. Hopefully a sale comes of it.

Dr. Flyview 11-23-2009 08:38 PM

Please post a price.

dru2 11-23-2009 10:48 PM

Mystikal, do you mean 215s in the back or front or both?

sanjee328i 11-24-2009 03:20 PM

I dont have a set price so please make me an offer, if the offer is reasonable we can take it further. I know the rims are not cheap so please no low ballers and keep in mind that they are in mint condition, never been refinished.

Dr. Flyview 11-24-2009 03:40 PM

I'll give you $400 without tires. I want them installed in the car with tires for <1k. Keep in mind I need the hubcentric rings (50?) + fenders pulled (100?) + tires (???)


All times are GMT -4. The time now is 08:42 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014