maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E36 (1991 - 1999) (http://www.maxbimmer.com/forums/forumdisplay.php?f=59)
-   -   e36 m3 struts with oval upper mounts (http://www.maxbimmer.com/forums/showthread.php?t=124719)

sparkybp 09-06-2009 12:36 AM

e36 m3 struts with oval upper mounts
 
1 Attachment(s)
I just upgraded the stock suspension on my 328is completely with m3(control arms with bushings, struts w/ springs and OVAL UPPER MOUNTS), m3 brakes and DS2 rims. My upper mounts sit at a weird angle inside the engine bay(not centered) and i just want to make sure that this is suposed to happen with these oval looking upper mounts. Please see picture below! this is driver side of the car which I guessed the L is for and the arrow from what I've read is suposed to point towards the front of the car.

sparkybp 10-26-2009 06:48 PM

turns out this is normal. also you can swap these strut hats from one side to the other to add some decent negative camber. note: may affect caster undesirably, but good for a quick and free camber adjust for more performance.


All times are GMT -4. The time now is 05:18 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014