maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Quebec/Gatineau/Ottawa (http://www.maxbimmer.com/forums/forumdisplay.php?f=119)
-   -   BBB Zero To 60 in 6secs Flat (http://www.maxbimmer.com/forums/showthread.php?t=123021)

ecuconnection 07-22-2009 08:28 PM

BBB Zero To 60 in 6secs Flat
 
finaly finished my turbo 12psi M42 build

Fully tunned Motronic by ofcourse me and some help from Jay(everlast) who I thank very very much... I have all the equiptment to fully live tune all OBD1 BMW DME's...If anybody ever need's some more power just let me know lol

Upgrades to come are high strength headstuds, 15psi, light wieght pullys, single mass flywheel, Bigger Injectors, drilled rotors

check out the video... enjoy!


Blown M3 07-22-2009 09:07 PM

From the video the car looks like it pulls hard.
Good work tripple B.

ecuconnection 07-22-2009 09:42 PM

Quote:

Originally Posted by Blown M3 (Post 1327767)
From the video the car looks like it pulls hard.
Good work tripple B.

couldnt have done it without your help... thanks

carjoe 07-22-2009 09:58 PM

Awesome! How's the rear end holding up?

BTW:I'm going to hit you up on that software...

ecuconnection 07-22-2009 10:22 PM

Quote:

Originally Posted by carjoe (Post 1327784)
Awesome! How's the rear end holding up?

BTW:I'm going to hit you up on that software...

Rear end no problems I still shit like a animal but thank's for asking lol

Software is cool... I will need your DME last three digits on the top of the case so I can gather the correct BIN & XDF file ... Just cover the cost of the chip so like $5... I have seen the dinan tune and they don't even touch fuel insted they advance PT and WOT ignition timing by a considerable amount over stock and thus the need for 91+ octane however we can back the timing off slightly and be a little safer and still see nice gains plus raise rev limit, top speed and a few other goodies ... just let me know

Bullet Ride 07-22-2009 11:43 PM

So what do you think you're making hp wise?
If you're doing 6sec flat I'd guess around 210-220 at the crank.

bmdbley'sBro 07-22-2009 11:44 PM

dude fkn awesome *rockout*

and im all over that like white on rice, eventually/ maybe
if i ever have a running m42 again

and before i buy a 328..u got any leads on cheap m42's?

and again nice, really looks like it pulls hard now!

ecuconnection 07-22-2009 11:58 PM

Quote:

Originally Posted by Dinan_M5 (Post 1327818)
So what do you think you're making hp wise?
If you're doing 6sec flat I'd guess around 210-220 at the crank.

more then a e36 m3 ... the supercharger kit at 10psi makes 200whp

ecuconnection 07-23-2009 12:00 AM

Quote:

Originally Posted by bmdbley'sBro (Post 1327820)
dude fkn awesome *rockout*

and im all over that like white on rice, eventually/ maybe
if i ever have a running m42 again

and before i buy a 328..u got any leads on cheap m42's?

and again nice, really looks like it pulls hard now!

Thanks

Bullet Ride 07-23-2009 12:23 AM

Quote:

Originally Posted by BearsBmw (Post 1327831)
more then a e36 m3 ... the supercharger kit at 10psi makes 200whp

Well the e36's with the s52b32 (240hp) weigh ~3100lbs and do 0-60 in ~6sec.

Your 318i weighs ~2600lbs. I don't know exactly how the gearing compares but if you're making more hp than an m3 I would think your 0-60 should be better than 6 flat.

ecuconnection 07-23-2009 12:41 AM

Quote:

Originally Posted by Dinan_M5 (Post 1327848)
Well the e36's with the s52b32 (240hp) weigh ~3100lbs and do 0-60 in ~6sec.

Your 318i weighs ~2600lbs. I don't know exactly how the gearing compares but if you're making more hp than an m3 I would think your 0-60 should be better than 6 flat.

I spin bad on launch with my cheap tires and sometimes in second
Also surface is full of winter sand

Few races from 1 2 3 gears that I have beaten by 1-2 car lengths at the bank parking lot

Also using 20w50 in the motor and 85w90 in the tranny witch is over kill and is robing some ponys

AWD talon on 10psi
Nissan Sentra R on 10psi
E36 M3
5.0 mustang tuned to 232whp

Eurostyle 07-23-2009 12:47 AM

Quote:

Originally Posted by bmdbley'sBro (Post 1327820)
dude fkn awesome *rockout*

and im all over that like white on rice, eventually/ maybe
if i ever have a running m42 again

and before i buy a 328..u got any leads on cheap m42's?

and again nice, really looks like it pulls hard now!

I got a few M42's for sale...From "cheap" to "mint"!!!
Also MIGHT consider selling my rebuilt M42, so i can upgrade to M52

m3convert 07-23-2009 01:50 AM

ill race you with my stock e36 m3 for money

m3convert 07-23-2009 01:51 AM

and you dont spin bad at all first for a lil u connect all way after second

chromius 07-23-2009 08:45 AM

Good stuff man*th-up*


All times are GMT -4. The time now is 09:31 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.