maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E30 (1983 - 1991) (http://www.maxbimmer.com/forums/forumdisplay.php?f=58)
-   -   Two BMW S14 motors, a tranny....... and a dream (http://www.maxbimmer.com/forums/showthread.php?t=115638)

tominizer 01-29-2009 09:56 AM

Two BMW S14 motors, a tranny....... and a dream
 
I may consider selling both E30 M3 S14 motors I have............ one's in the car and will come with the tranny and everything and I have a second backup on a stand, no tranny though. Everything is there but the A/C bits. One stock header, one 50/50 with a beautiful custom stainless exhaust. Lot of other parts too.......... including a lot of bits like the fibreglass air box, some of Lee's bits all to go to MS or stand alone, etc.

I believe the motor in my car is a 180,000 KM motor. I've done a lot of the maintenance on it recently .......... bottom end, all the gaskets, starter, new clutch, water pump, samco hoses, alternator, new oil cooler, new oil pump, Gustave wiring set, new cap and rotor, BMW 50/50 two piece header, brand new 740 engine mounts, etc, etc......... because it was all out of the car. Tranny also has that DTM (?) short shifter kit from John (?). Basically, all the stuff most enthusiasts would do when the motor/tranny is out, but is still running fine. Since then, about 200 km only on the car. It was running well before, so I didn't get into the opening it all up right down to the guts. I wrote down the compression numbers somewhere and they are all good.

The second motor..........I believe one cylinder is down a bit on compression, but everything is there. Mileage wise I can't confirm 100% but I think the PO said around the 150,000 km mark.


If anyone knows of anyone that may be interested, have them contact me. This is very preliminary at this time. This is in no way a give-away or a steal. It will be for fair market pricing as the funding would be going towards the new project I'm considering........ a motor swap. And I'm thinking the new swap will be in the $16K range......... The sale of the two motors and the bits hopefully will be a good start in achieving that budget........... although I do understand it will still be nowhere near the total required. And no, it's not a euro motor. This swap I'm considering has been done, but it's not common.


Yeah, I maybe *drink* for even thnking about this .........but you only live once !!!


Comments are welcome......................

e30_kid89 01-29-2009 03:09 PM

Transmission I'd be interested in...If you can give me a price and have it out and ready in 2 weeks.

tominizer 01-29-2009 05:13 PM

IF this happens, it all has to go ................. or nothing. IT will not be a part out of bits and pieces as that will make no sense.

craz azn 01-29-2009 05:16 PM

Plans? :P

jello_g 01-29-2009 07:20 PM

'merican iron?

E30M42cab 01-29-2009 07:43 PM

Duramax Deisel?

Bullet Ride 01-29-2009 08:49 PM

2 hayabusa engines?

SamE30e 01-29-2009 09:34 PM

Rotary?

tominizer 01-29-2009 10:14 PM

Gawd no.................... hemi *drink*

Yeah, so far the plans are expensive and daunting......to me....... an no, it's not an S52. That's all I have to say.

e30_kid89 01-29-2009 10:35 PM

S38?

Sounds about right for a semi-rebuild/refresh, buying new crazy expesnive parts at the dealer...:D

SamE30e 01-30-2009 12:46 AM

I've always wanted a K20 in a 318. Or F20.

tominizer 01-30-2009 09:12 AM

Nope.............. anyways, the more and more I dig and lay out the plan, the farther away this is all getting. Oh well.

sincere 01-30-2009 12:15 PM

i just bought an e30 m3. i will be needing some parts etc... is there any pricing you can give me on anything? or can i have a number i can call for when i know exactly what i need? and where are you located? thankyou

punnzzells 01-30-2009 12:19 PM

Tom,

Don't do it... it's too crazy! ( Ok.. I have no idea, just thought I'd mess with everhyone )


sincere.. what car did you buy?

m60e30 01-30-2009 01:23 PM

v12?


All times are GMT -4. The time now is 12:50 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014