maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Quebec/Gatineau/Ottawa (http://www.maxbimmer.com/forums/forumdisplay.php?f=119)
-   -   Christmas present (http://www.maxbimmer.com/forums/showthread.php?t=114420)

George77 12-20-2008 08:38 PM

Christmas present
 
10 Attachment(s)
I just got my Christmas present for my next project.The smallest one is what I had on the red bimmer

ecuconnection 12-21-2008 12:37 AM

let the shit show begin!! NICE TURBO!!!

slemmer 12-21-2008 01:16 PM

Nice. Looks like it came out of a hairdryer.

MiroE36 12-21-2008 05:37 PM

Nice can of Canada dry... I would have preferred a can of Cola, but hey a free can is a free can.

:D

George77 12-21-2008 10:09 PM

Quote:

Originally Posted by MiroE36 (Post 1241662)
Nice can of Canada dry... I would have preferred a can of Cola, but hey a free can is a free can.

:D

That's what I could find at that time for reference.Next time I'll get some PEPSI

everlast 12-22-2008 01:19 PM

Do you have a compressor map for that beast?

ecuconnection 12-22-2008 01:29 PM

I used this webpage to get my map... It might help if you try looking for one with the same compressor trim's maybe!

http://www.rbracing-rsr.com/turbosupermaps.html

George77 12-26-2008 12:33 PM

I don't have a map but I think that I identified it and it's a 60 series good for 500 hp.T he compressor impeller is 60mm ind and 76mm ex and the turbine impeller is 71mm with 62 mm and .82A/R.

everlast 12-26-2008 12:47 PM

Jesus that is a big turbo. What kind of a setup and tune do you plan on, and what are the goals?

George77 12-26-2008 01:00 PM

My goals are a build m50b25 and 20psi of boost ,should bring me to around 400 whp which means 500 to the crank

everlast 12-26-2008 01:31 PM

WoW!! What are you doing to the motor to support this?

George77 12-26-2008 02:07 PM

pistons,con rods,O ring the block

ecuconnection 12-26-2008 02:25 PM

dang!! this is going be hot george !!

everlast 12-26-2008 02:25 PM

Awesome. Dropping compression too?

Who is doing your machine work? I am considering o-ringing the head. Thoughts or advice?

George77 12-27-2008 12:54 PM

Me and Ralph ,we are making a device to Oring the block on the car ,you only need to remove the head,so when you'll have the head removed let as know and we can Oring for you the block .


All times are GMT -4. The time now is 03:37 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.