maXbimmer Forums

maXbimmer Forums (
-   Quebec/Gatineau/Ottawa (
-   -   Needed: DB37 female connector (

everlast 09-18-2008 11:34 AM

Needed: DB37 female connector
I'm starting to play with my megasquirt and need a DB37 connector.. anyone have one or a cable I could have?

Lee in Ottawa 09-18-2008 01:23 PM

I have no idea what you just said but it sounded sexy

everlast 09-18-2008 01:44 PM

You'd better figure it out; you'll need one if you want to megasquirt. :)

carjoe 09-18-2008 03:16 PM

What is that? SCSI connector? I might be able to snag a cable from the office if we have any.

FuryriderX 09-18-2008 03:54 PM

db37? any good electronics shop should have them. or hack up an old printer cable.

i think the scsi cables are an even bigger connector...

everlast 09-18-2008 04:09 PM

Nope.. active components not only didn't have them, can't even *order* them! DB37 looks like a serial cable (plain ol' pins and holes) except it has 37 pins. The usual parallel cable is a DB25, serial is DB9. So not, SCSI, not printer, not parallel.

Honestly, I don't know WHAT the **** a DB37 was used for. I can get it online, but I preferred to, uh, get it for free. :)

Lee in Ottawa 09-18-2008 07:30 PM

good luck with that.

JAy what else do i need to order from diyautotune?
Map sensor (3 bar right)
IAT sensor?

everlast 09-18-2008 08:33 PM

Let's do an order together and save shipping. You don't need a MAP sensor unless the one you have is too small.. I think its a 2.5 bar at least now. You and I need:
-intake air temp sensor
-coolant temp sensor
-female DB37 (unless you have one already)

Also, not from diytune, we need throttle position sensors that have poteniometers on them, instead of the on/off on the m20/m30 throttle bodies. Maybe we can meet up with weekend and discuss.

All times are GMT -4. The time now is 10:00 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018