maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Rides (http://www.maxbimmer.com/forums/forumdisplay.php?f=5)
-   -   92 325is (http://www.maxbimmer.com/forums/showthread.php?t=110358)

rider-. 09-12-2008 10:00 PM

92 325is
 
i baught this thing a few months ago strictly for drift, so far all i have done to it was a 5 speed swap and put some tein lowering springs onto it. still need to weld the diff, looking to trade my LSD for an open diff from an automatic 318 if anyones got one.... Ive got lots of plans for this car for the winter tho, pretty excited!

http://img.photobucket.com/albums/v2...x/IMG_0004.jpg
http://img.photobucket.com/albums/v2...x/IMG_0007.jpg
http://img.photobucket.com/albums/v2...x/IMG_0010.jpghttp://img.photobucket.com/albums/v2...x/IMG_0013.jpg

e30bradbmx 09-12-2008 10:21 PM

PURPLE you must be gay

ImolaZHP 09-14-2008 08:29 PM

wouldn't you want to keep an LSD for drifting. Open diffs suck

T.Dot_E30 09-14-2008 08:37 PM

Quote:

Originally Posted by ImolaZHP (Post 1199963)
wouldn't you want to keep an LSD for drifting. Open diffs suck

he plans to use a welded diff.

Quote:

Originally Posted by rider-. (Post 1199326)
still need to weld the diff,


craz azn 09-14-2008 08:47 PM

Cool project man, good luck with it!

Trouble65 09-15-2008 01:25 PM

Dude, don't know what to say.
Yeah,,,, the colour.

///tyron 09-15-2008 01:40 PM

this wouldnt be my first choice for a drift car because, where our sub frame mounts to the chasis, the metal there is like card board and your subframe will tear right out. On 36 m3's the plates came stock. unfortunetly, non-M e36's didnt have them installed.

make sure u get the plates from turner motorsports and weld them in, or you're going to have a big problem. Other than that, its not a bad car for drifting.

ACS_DAN 09-15-2008 02:00 PM

Quote:

Originally Posted by ///tyron (Post 1200315)
this wouldnt be my first choice for a drift car because, where our sub frame mounts to the chasis, the metal there is like card board and your subframe will tear right out. On 36 m3's the plates came stock. unfortunetly, non-M e36's didnt have them installed.

make sure u get the plates from turner motorsports and weld them in, or you're going to have a big problem. Other than that, its not a bad car for drifting.

x2, this is a MUST. I would also suggest doing your RSM's as well. Every bit will help!
Nice car.

rider-. 09-15-2008 03:31 PM

yah i heard the car had rear subframe issues and i am definatly going to reinforce before taking it to the track

Alex Dee 09-15-2008 03:42 PM

honesty coolest bmw i have seen on this web site very cool paint yo i think ppl are jelous i know i am

Eurotakeover 09-15-2008 07:40 PM

Nice slab


All times are GMT -4. The time now is 06:49 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.