maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E30 (1983 - 1991) (http://www.maxbimmer.com/forums/forumdisplay.php?f=58)
-   -   starter question (http://www.maxbimmer.com/forums/showthread.php?t=108420)

87325I 07-25-2008 02:19 PM

starter question
 
1 Attachment(s)
My starter finally died, I got the 3 of the 4 bolts off but couldn't get to the last one (green arrow in the attached pic). Is there a way to get at it without removing either the intake manifold or transmission? Or MUST the intake come off? Fack 2 parties to git to and no car this weekend.

supernaught 07-25-2008 03:00 PM

put 2 bends in a wrench and put it on the trans side, hold the wrench with a loooong pair of needle nose pliers
I was able to do it without bending the wrench but it makes it easier
for the eng compartment side, loooong extensions and a u joint are your friends.

87325I 07-26-2008 06:09 PM

got it
 
Yes guy I got it back in. I used a long screwdriver in between the nut and bolt and twisted it while using a socket with extension to get that last bolt off from the engine side. *th-up*


All times are GMT -4. The time now is 10:57 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.