maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Bimmersport Automotive (http://www.maxbimmer.com/forums/forumdisplay.php?f=103)
-   -   Technique Tuning/ICS and Bimmersport Automotive (http://www.maxbimmer.com/forums/showthread.php?t=108012)

Jon@Bimmersport 07-15-2008 03:13 PM

Technique Tuning/ICS and Bimmersport Automotive
 
Finally our monster is let loose! The turbo E36 M3 some of you saw in our shop is rolling on the streets. I have only one word for this car...WOW! The kit totally transformed the car into something out of this world, but maintains the stock BMW feel when driving normally. We also added H&R suspension with Turner Motorsport and UUC drivetrain components to help put the power down, and sustain the rigorous amount of force being put through the driveline. We totally recommend this kit to anyone looking for some serious power, and I'm sure the owner himself would tell you the same thing.

Heres some pics I snapped through the build..

The beginning:
http://i47.photobucket.com/albums/f1...andanuk017.jpg

Getting ready for the new .140" MLS headgasket:
http://i47.photobucket.com/albums/f1...andanuk033.jpg
http://i47.photobucket.com/albums/f1...andanuk035.jpg

The turbo mounted in place (note: oil AND water cooled)
http://i47.photobucket.com/albums/f1...t/HPIM0624.jpg

UUC 16.9LB Steel LTW flywheel and Multipuck ceramic clutch:
http://i47.photobucket.com/albums/f1...t/HPIM0675.jpg
http://i47.photobucket.com/albums/f1...t/HPIM0679.jpg

Intercooler mounted (kit includes new aux fan - PnP!, new remounted washerfluid tank, best part of all perfect fitment all around):
http://i47.photobucket.com/albums/f1...t/HPIM0620.jpg

Wastegate pipe and downpipe mounted (those can mount to stock exhaust):
http://i47.photobucket.com/albums/f1...t/HPIM0683.jpg

The best part but saddest (for me), she's ready to go back home:
http://i47.photobucket.com/albums/f1...t/IMG_0001.jpg
http://i47.photobucket.com/albums/f1...t/IMG_0002.jpg

Dyno sheets will come soon guys....the owner is enjoying himself on 'the ring' probably right about now...lucky SOB.

EMPOWERD 07-15-2008 03:21 PM

Nice work Tripod, now how much will it cost me for one of those kit (& installation)? What's the estimated power? Lets see some numbers to back that baby up!

Boots R 07-15-2008 03:26 PM

get the **** out. That's amazing. Can't wait for dyno numbers.

kevin325 07-17-2008 10:41 AM

yes turbo man!!!

Hamann330ci 07-17-2008 02:52 PM

nice work boys, lets see some numbers now and what this thing put out.
also how much boost, more details

Hamann330ci 07-17-2008 02:55 PM

was software provided for it already with the kit ?

///tyron 07-17-2008 05:12 PM

what turbo and manifold is it running? by the looks of things that waste gate re-circ is going to creep because of the 90 degree angle, when recirculated back into the exhaust.

other than that nice work.

NickP 07-18-2008 12:47 AM

Quote:

Originally Posted by ///tyron (Post 1177895)
what turbo and manifold is it running? by the looks of things that waste gate re-circ is going to creep because of the 90 degree angle, when recirculated back into the exhaust.

other than that nice work.

Umnnnnnnn

http://www.atsracing.net/38new1.jpg

Jon@Bimmersport 07-18-2008 01:30 AM

Quote:

Originally Posted by NickP (Post 1178083)

*th-up*

The kit uses a Garret T3/T4 60-1 turbo, although some people upgrade to a GT35R. Also the manifold is a cast manifold.

Randy,

The kit costs around ~$8g USD + customs/duty/taxes...as far as install goes come by and we can work something out. The e46 kit is even more impressive! *rockout*

Rocco,

The wastegate has a 8.5lb spring right now, but he's using the AEM Tru Boost controller so he can run different settings (depending on your spring). The software is provided with the kit as well. I think we should swap it out for a 13.5lb spring :D

Hamann330ci 07-18-2008 01:46 PM

Thanks john, sounds good

You said that there is a kit for E46 ? Link?

///tyron 07-18-2008 04:19 PM

Quote:

Originally Posted by NickP (Post 1178083)


Am i missing something? Its still going to creep either way.

bad pic but this is how it should of been run. notice the angle on the routed wate gate pipe.

http://img297.imageshack.us/img297/1012/53321987pl6.png
[url=http://g.imageshack.us/g.php?h=297&i=53321987pl6.png][IMG]


All times are GMT -4. The time now is 05:27 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.