maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Forced Induction (http://www.maxbimmer.com/forums/forumdisplay.php?f=97)
-   -   F/I N00B needs help (http://www.maxbimmer.com/forums/showthread.php?t=107018)

PROJECT_E36 06-17-2008 11:06 PM

F/I N00B needs help
 
Alright guys i know my way around normaly asperated engines and cars in gerneral. but when it comes to f/i im pretty clueless. so just a couple of questions about my new turbo.

So im wondering if i have to weld on a flange to the exhaust part of the turbo ??? if not what kind of bracket blots onto it?

http://i236.photobucket.com/albums/f...Picture065.jpg

Also the oil feed line is the larger one right ? and comes through the top of the turbo, and the oil return is the small steel briaded line right ?

http://i236.photobucket.com/albums/f...Picture066.jpg
http://i236.photobucket.com/albums/f...Picture067.jpg

lastly what kind of vacume line, and were does it go ? (the one closer to the exhaust turbine)

http://i236.photobucket.com/albums/f...Picture066.jpg

thanks again for your help

-Jakub

NOTORIOUS VR 06-17-2008 11:32 PM

Quote:

Originally Posted by PROJECT_E36 (Post 1167336)
Alright guys i know my way around normaly asperated engines and cars in gerneral. but when it comes to f/i im pretty clueless. so just a couple of questions about my new turbo.

So im wondering if i have to weld on a flange to the exhaust part of the turbo ??? if not what kind of bracket blots onto it?

Looks like a V-band housing to me. So no you don't weld anything to it directly. You need to get a V-band flange and that is what you weld your downpipe to, which then inturb clamps to u'r exhaust housing.

http://www.full-race.com/catalog/ima...ange%20kit.jpg


Quote:

Also the oil feed line is the larger one right ? and comes through the top of the turbo, and the oil return is the small steel briaded line right ?
Exactly the opposite actually. The feed is the braided line, and the drain is the larger rubber hose.

Quote:

lastly what kind of vacume line, and were does it go ? (the one closer to the exhaust turbine)
The vacuum lines are for your wastegate (the actuator w/ the rod going to the exhaust housing). They go to your manifold and boost controller.

Quote:

thanks again for your help

-Jakub
No problem *th-up*

PROJECT_E36 06-18-2008 07:39 PM

thanks alot gor your help :D


All times are GMT -4. The time now is 09:30 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.