maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Detailing & Care (http://www.maxbimmer.com/forums/forumdisplay.php?f=98)
-   -   Removing bird dropping etching (http://www.maxbimmer.com/forums/showthread.php?t=106223)

slemmer 05-29-2008 11:48 PM

Removing bird dropping etching
 
Damn birds. One dumped a big load on my black hood. I washed it off a day later only to see the haze left from the droppings. I tried waxing after washing to see if it'll go away, but no good. Any suggestions other than sanding and repainting? Thanks.

Gamite 05-30-2008 08:32 AM

did you try polish? or claybar or if those can't get it out, try some rubbing compound (becareful with this, it can strip your clear coat if you don't know what you're doing)

slemmer 05-30-2008 11:39 AM

no - the wax didn't work, so I'll try the polish next.

VSanj 05-30-2008 01:37 PM

damn, that sucks brother. I have a stain on my roof that came out itself over numerous washes

Gamite 05-30-2008 02:33 PM

wax probably wouldn't work because it's more of a protectant, depending on what kind of wax you bought.

agentM 05-31-2008 10:43 PM

Gamite is right, you should polish it then wax it back. Those bird shit have some kind of acid in it. If you don't take it off right away it will give it a stain. If you don't have a polisher just dap a little polish on it and rub it lightly. Then put wax over it. Good luck


All times are GMT -4. The time now is 10:15 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.