maXbimmer Forums

maXbimmer Forums (
-   Suspension & Brakes (
-   -   E30 IE3, GC and RX7 BBK (

Dissembler 12-31-2012 12:06 AM

E30 IE3, GC and RX7 BBK
For sale are my IE3 w/billy sports, ground control touring plates and RX7 brake upgrade. Being sold as a bolt in assembly, just swap out your entire front suspension in one piece! Brake pads are EBC yellows and the wheel bearings have been machined to accept Corrado rotors without modification. Comes with SS brake lines for the front only. This entire set up was bought brand new and now have about 15k on them.


Dissembler 12-31-2012 04:18 PM

5 Attachment(s)
surface rust on the rotors from the car not moving for a couple days before i took this suspension out.

I know I have the rear SS lines somewhere, if I can find them they will be included in the sale!

cormier 12-31-2012 04:56 PM

Sounds like a wicked drop in upgrade for a lucky e30 owner!

Dissembler 01-02-2013 09:45 PM

^^thanks! Its everything in one shot :-)

solarian 01-03-2013 11:55 AM

Hi, is this for the fronts only or front and rear suspension and just front brakes?

Dissembler 01-03-2013 06:14 PM

Everything, just didnt take pictures of the rear springs and shocks. The rear shocks use turner motorsports upgraded urethane upper mounts. Just the front brakes (complete) are included.

Dissembler 01-06-2013 01:15 PM

to the top

windsor318is 01-06-2013 07:24 PM

Willing to separate? Im only interested in the springs and plates

Dissembler 01-06-2013 10:54 PM

Nope, package only unless I get deposits from 2 people to cover the entire thing.

Dissembler 01-09-2013 08:36 PM

up and away!

for those interested installation can also be negotiated at time of purchase

Dissembler 01-14-2013 12:19 AM

o o

clementine 01-14-2013 07:11 PM

what is the bare minimum offset on the rim that could be used
thank you

Dissembler 01-14-2013 08:29 PM

I had 2 sets of rims that clear, one et27 and one et22.

clementine 01-14-2013 10:30 PM

would you happen to know if et34 would clear without spacers?

Dissembler 01-15-2013 12:02 AM

I'm going to guess no unless it is a rim designed with huge amounts of caliper clearance in mind.

All times are GMT -4. The time now is 07:56 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018