maXbimmer Forums

maXbimmer Forums (
-   Track Junkies (
-   -   FS: E46 M3 custom roll bar kit - you weld (

Gtfour 12-12-2016 04:23 PM

FS: E46 M3 custom roll bar kit - you weld
Hi guys,

When I made my roll bar in my E46 M3 track car, I did 3 identicals roll bar at the same time. I installed mine and sold the 2 others locally. I will be making 5 more of these in the next month and I tought I would also offer them here on this forum because a lot of guys track their E46 M3.

This is not your usual bolt in roll bar btw so I am aware that a Kirk or Autopower sells for half the price.

You can take a look at my build thread to see more pictures of the roll bar:

I will sell my roll bar kit with all the tubing already notch and the plates bend. All you need to do is fit and weld it in your car.

Pictures are just to show what's included (how many bars) but the bar between the 2 rear shock tower is too short in the pics. Also, the plates that hide the rear subframe tied in attachment points are now bend with a hole in it ready to be weld.

Here is what's included in the kit:

-1x main hoop
-1x horizontal bar between rear shock tower
-2x diagonal bars from main hoop to rear shock tower
-2x diagonal bars from main hoop to front subframe reinforcement tie-in points
-2x diagonal bars from rear shock tower to rear subframe reinforcement tie-in points
-1x X-brace between rear subframe reinforcement tie-in points
-4x bars for subframe reinforcement tie-in points
-2x main hoop base plates
-2x rear shock tower plates
-4x covers for subframe reinforcement tie-in point holes
-2x gussets from main hoop to B-pillars (chassis)

Kit will come with an installation instruction guide and can also make it in PDF if you want.

Price: 1200$

Gtfour 12-12-2016 04:23 PM

Gtfour 12-12-2016 04:24 PM

BmW1819 12-19-2016 10:04 PM

Very nice and clean

Gtfour 12-20-2016 10:26 PM


Gtfour 02-25-2017 08:16 AM

Gtfour 10-18-2017 09:28 PM

Gtfour 01-06-2018 01:14 PM

ALL kits are sold, not doing any more kit.

Thanks to all guys who bought a kit and hope you enjoy!

All times are GMT -4. The time now is 05:43 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018