PDA

View Full Version : USED PARTS FORSALE -Long list of Parts-


MOTRONIX
02-10-2002, 11:20 PM
hi everyone, i have many used parts for sale. here is a list of these parts. i need the space for our growing race car team.

-H&R SPORT LOWERING SPRINGS 6MNTHS OLD M3 1997-1999$280.00
-APEX LOWERING SPRINGS 1.5' DROP 530/540I E34 1993-1996 $150.00
-FRONT STOCK UPPER STRUT BEARINGS E36 1992-1999
$50.00
-FLYWHEEL 240MM FACTORY M3 1997-1999 $400.00
-FLYWHEEL 220MM FACTORY 325I 1992-1996 $350.00
-DIFFERENTIAL 4.44:1 NON LSD 318TI 1996-1999 12K $700.00
-DIFFERENTIAL 3:73 LSD 1987 325I 80K $700.00
-WINDOW REGULATOR W/MOTOR (SIZZOR STYLE) LEFT SIDE 325I E30 19988-1991 $125.00
-WINDOW REGULATOR W/MOTOR (SIZZOR STYLE) RIGHT SIDE 325I E30 19988-1991 $125.00
-POWER STEERING COOLER AND RESEVOIR COMPLETE 318 1992-1998 115K $200.00
-POWER STEERING PUMP 325I 1992-1996 & 525I 1992-1995 48K $200.00
-A/C COMPRESSOR ALL E36 92-99 325I/328/M3 89K
$300.00
-A/C SUPPORT BRACKET 1992-96 318 $100.00
-MASTER CYLINDER M3 E30 1988-1991 80K $100.00
-ABS PUMP UNIT ALL E30 1987-1991 325 AND M3 40K $200.00
-ASC THROTTLE HOUSING W/SWITCH 325I 1995-1996 328I/Z3/M3 1996-1999 25K $200.00
-P/S AND ALTERNATOR SUPPORT BRACKET 325 1984-1991 $100.00
-IGNITION COIL PACKS WITH RESISTED ENDS 325/328/M3 1992-2000 $75.00 each (have 10)
-ENGINE WIRING HARNESS (AUTOMATIC) 325I 1994-1995 COMPLETE $500.00
-OIL PAN 325/328/M3 1992-1999 $150.00
-OIL PAN 325I 1984-1991 $150.00
-INTAKE MANIFOLD (A GREAT POWER CONVERSION FOR 1996-1999 2.8/3.2 ENGINES) 325I 1992-1996 $250.00
-TRANSMISSION 5SPEED M50 325I 1992-1996 $500.00
-TRANSMISSION 4SPEED ZF AUTOMATIC 735/635/535 1985-1987 150K $800.00
-TRANSMISSION 4SPEED ZF AUTOMATIC 325I 1987-1991 85K $900.00
-TRANSMISSION W/DRIVESHAFT AND SHIFTER 5SPD CLOSE RATIO 1973-1976 2002 ! ! ! $1,000.00
-ENGINE COMPLETE W/MANIFOLDS/PUMP/ALTERNATOR 735/635/535 1985-1987 150K $900.00
-ENGINE (LONG BLOCK) M50 W/VANOS 1994-1995 325I 82K $2,000.00
-ENGINE (LONG BLOCK) M50 W/O VANOS 1992 ONLY 325I 150K $1,000.00
-ENGINE (LONG BLOCK) M30 3.3LTR 1984 533/633 175K $500.00
-CYLINDER HEAD 325I 1993-1996 2.5LTR (BARE) 145K
$800.00
-QUARTER LEATHER SKIN PANELS E30 325 1984-1991 2DR. BLACK $100.00
-REAR SEAT BLACK LEATHER W/ CENTER ARM REST E30 325 1984-1991 $300.00

i know the list is long, but have a look and make me an offer i cant refuse. email me back or call and leave a message at my office. thanks.

dave@motronixmotorsports.com
905.856.3811

MOTRONIX
02-12-2002, 09:37 PM
i forgot to mention that all prices are in canadian prices

thanks
dave *smoke*

djcontra
02-14-2002, 10:20 AM
wow only $2000 for a vanos e36 engine??

i'll come to you when i need a new one, mine is getting up there past 220,000km's now...i figure i'll let it go around the 300,000 mark which wont take me long seeing as how i drive a looooong way to work every day

2L8-IWON
02-28-2002, 11:31 PM
*uzi* *th-up* Have To Say Amazing Prices & Products!!!!!*drunk*

I have to say that I had Dave install the Tranny that I bought from him.. I'm very happy he knows his stuff, He is quick and gives you a very fair and competative deal NO REASON TO COMPLAIN!!!!!!!!!

THANKS DAVE, A HAPPY CUSTOMER!!!

By the way thanks for helping me get all six gears back into my car kinda weird with only 3 gee...

Thanks Again

So yeah my point was if any of you guys need sumpn give dave a shout!!!

dendenx2
03-01-2002, 04:15 PM
Hi Dave,

Can you get the B&B Triflow Exhuast for 328is 98.
If so, how much is it?

Thanks.

*wave*

MOTRONIX
03-03-2002, 02:25 PM
hi caleb,

thanks.
dave

how is the shifter? ;)

Sun
03-03-2002, 06:13 PM
.

2L8-IWON
03-05-2002, 08:35 PM
I love the shifter but I still can't wait for my computer chip.....?? mmmm boo whoo.. I know I cant wait to get it in the car!!!!! Hope that you are over the flu soon!!!!!

Ciao

2L8-IWON
03-09-2002, 11:51 PM
Finnally no speed limiter and an extra 1000rpms he heeee I have to say that the chip works awesome thanks dave!!!!!!!

now next on the list HIDs & Euro Demon Eyes & OEM M3 Body kit, and M5 18" rims!!!

Thanks Dave!!!

Actually can you get Reiger Body Kits??? Preferably E46 M3...

Thanks Again

Ciao

Caleb Kalenuik

BoBimmer
01-01-2003, 08:53 AM
I need all parts for a 5spd conversion on a 91 e30! I need em real cheap! LOL!

BoBimmer
01-01-2003, 08:55 AM
By the way would an M50 tranny work on M20 engine would the gear ratios be right? I know the M20 tranny works with M50 engine!? Which is a better tranny@?

thinair
01-01-2003, 05:13 PM
Damn, I thought this was a recent post from Motornix.....and I got my hopes up for nothing (for buying a used part)

JonD
01-02-2003, 02:28 AM
MOTRONIX,

Check your PM

punnzzells
01-04-2003, 12:22 AM
Hi Motronix,

Do you be having any HAOIL FILTAS?

Mike.

:D

thinair
01-04-2003, 04:19 PM
Just a note to you guys, look at the day that Motornix originally posted this thread......

punnzzells
01-10-2003, 01:57 AM
Whaut gwan??

yup, mmmhmmm...yup....??? still waiting for my haoil filtas?

:D

Mike.

punnzzells
01-14-2003, 03:20 AM
do u have any piztowns?

:D

mike.

MOTRONIX
01-15-2003, 02:14 PM
punzells ..

you wop :D

punnzzells
01-15-2003, 03:58 PM
YYYYAAAAAAA,,,MMMMM HHHH,MMMMMM.....YAAAAAAP! WHO'S THE TRAINEE MEMBER BIOTCH!

E36 HAOIL FILTA?

:d:d :moon:

mIKE.

MOTRONIX
01-15-2003, 05:34 PM
HAHHAHAHAHA YOU FOOOL.... HAHAHAHAHAHAHA

:D