PDA

View Full Version : Relays/fuse identification.


Ej_Red
10-06-2007, 05:22 PM
Can someone post a pic or link me to the fuse/relays identification?
Mostly relays since fuse identification i have in the owner's manual.
My Auxilary fan is seized and it stopped working. I want to wire in another
electrical fan. Fuses on the fan are ok, i just need to know if there is a relay for it.

FuryriderX
10-06-2007, 11:58 PM
there is a relay. in fact, there's 2. one for low speed, one for high speed. they're in the fusebox, and they typically dont go bad. just cut the harness off the fan and use it to wire in your new fan.

Ej_Red
10-07-2007, 12:27 PM
I haven't tested them yet but i thought since the fuses are ok, relays might have been gone due to fan beeing seized. Too much amperage trying to turn the seized fan so common sense fuses will go first but they are ok.

I plan on getting rid of the viscous fan since it's the back up fan only. By the way the clutches got seized in it too so it's on all the time and i never get the proper operating temps plus my fuel mileage went down big time cause it runs rich and i'm loosing power.