View Full Version : Racing parts E36 for sale

09-07-2007, 03:06 PM
- 2.8 alum block knifedge crank with titanium retainers and M3 cams and forged pistons: head cracked: 2000 Cdn Cost 6000 cdn to build good for 260+HP
- M3 injectors 21lb: 80 Cdn
- OBDI M50 intake manifold 100 Cdn
- UUC underdrive pulleys (probably damaged)
- OBDI conversion harness and DME: 300 Cdn
- SS clutch line: 30.00 US
- 8.5lb Lightweight BMW Motorsport flywheel and race clutch: 900 Cdn
- Ireland engineering headers: 400 Cdn
- M3 short shifter and delrin bushings: 100 Cdn
- M3 transmission and driveshaft: 800 Cdn
- M3 transmission 40 000km: 800 Cdn
- custom CAI (probably damaged)
- Borla Stainless steel 3" racing exhaust with Magnaflow resonator: 350 Cdn
- 5 Point harness passenger
- 6 spoint harness driver bought last year: 100 Cdn
- 2 x racing seats for E36: 200.00 Cdn
- Front solid offset delrin control arm bushings: 50 Cdn
- M3 front spindle and brakes: 300.00 Cdn
- Custom front strut brace (damaged)
- BMW X brace: 100 Cdn
- Mintex full race compound brake pads used + new HT10 race pads: 200.00 Cdn
- Ground control racing coil over suspension: 1000 Cdn
- UUC sway bars front and rear: 150.00 Cdn (front might be bent)
- Rear adjustable control arms for negative camber: 70 Cdn (1 is damaged can be fixed)
- 3 x 17" rims with R compound tires BBS RK: 500.00 Cdn
- Steering wheel with momo hub and quick disconnect. 70 Cdn
- ARP DTM wing with trunk lid: 100 Cdn
- Complete M3 rear axle with solid subframe bushings and speherical Trailing arm bushings 500 Cdn
- M3 3.38 LSD differential: 40 000km 800 Cdn
- SS brake lines sold with callipers
- Fire system 300 Cdn
- battery shut off switch + tiny battery... 100 Cdn
- Euro oil canister for oil cooler: 200 Cdn
- Euro HFM: 100 Cdn
- 325is LSD 3.15 differential 270.000km: 250 Cdn

Parts to be installed:
- Oil pressure, oil temperature, water temperature gauges mechanical: 120 Cdn

- 1 spare E36 coupe hood: 50 Cdn
- 1 set of 17" rims with 50% used toyo RA1: 800 Cdn
- 1 set of 17" new rims with 10% used toyo RA1: 1000 Cdn
- 2.8l iron block + spare set of 2.8l pistons with connecting rods
- lot's of engine parts for the cylinder head, spare cams, vanos, coils...
- Black dashboard E36 coupe: 50.00 Cdn

I have yet to take pictures of it all, I will start pulling the parts out this week end.

09-07-2007, 03:12 PM
Hows the shape of the hood? Any rust/dents, and what color. Assuming theres no dents i'll grab that hood off you!

Also interested in the X-brace, does it come with all the mounting hardware?

Lemme know

Boots R
09-07-2007, 03:14 PM
The rims with 50% used tires, what make/model are the rims?

09-07-2007, 03:15 PM
Hood has some rust at the front, that is why it is 50 Cdn. Nothing that cannot be fixed.

Xbrace will come with bolts, you need to get the other inserts.

09-07-2007, 03:16 PM
The rims with 50% used tires, what make/model are the rims?

Aftermarket rims, the 100% rims are AC Schnitzer replica.
The other ones I am not sure, some other aftermarket brand with a nice lip. I might remove the tires and sell the rims 400 Cdn a set.

I will take pics of the rims this week end.

09-07-2007, 05:21 PM
Get that xbrace keven!

09-07-2007, 05:23 PM
I'll grab that Xbrace, and i'll come check the hood out on Monday if you're okay holding on to those items until then. The xbrace is for sure!

09-07-2007, 05:43 PM
Great deal.

09-08-2007, 12:08 AM
pics of seats and steering wheel?

09-11-2007, 07:18 PM
whats the condition of the coilovers???

09-11-2007, 07:20 PM
whats the condition of the coilovers???

09-11-2007, 08:10 PM
Coil overs are in great shape, I take good care of my mechanical.

09-11-2007, 08:17 PM
interested in the steering wheel

email or pm me more info on the wheel



09-11-2007, 10:43 PM
will the headers fit a E36 M3?

09-12-2007, 07:54 AM
They will fit any 325i, 328, M3 engine, I am not sure about the air pump though.

09-12-2007, 11:31 AM
Pictures of the BBS RKs please. What kind of tires are on them?

09-12-2007, 11:52 AM
BBS RK, 2 are like new, 1 has a little curb rash, one... well is dead.
Toyo RA1 235/45/17

Pictures to follow