PDA

View Full Version : I head swap


racing_trend
08-15-2007, 01:05 AM
hey guys i have an 87 ETA one of the rockers in the top end i believe is gone which is making alot of noise now, i have access to an IS car for parts which has the motor and what not still there, i was wondering what is involved putting the I head on to my eta and what parts will i need to change


thanks

InfiniteDice
08-15-2007, 07:44 PM
This has been answered many times over.

I head can be used. But you'll lower the compression. Good for boost bad for NA.

It's alot of work man... to set up properly.

You could just pull the rockers and shafts from the I they are identical.

Read some threads in here, some cover this topic extensively,

Mike.

SamE30e
08-15-2007, 10:06 PM
The I cam is different. If you swap the I cam in you need to swap the I ecu.

oldskool3
08-16-2007, 10:23 PM
swap the whole i engine over to your eta or as suggested just pull the rockers.