PDA

View Full Version : Help with m20 MAF conversion


Moded E30
08-12-2007, 08:08 PM
HI

I'm going to make a maf conversion for my m20

and i need your help with the wiring.:cool:

i'm going to use e36 maf sensor but i don't know which is better for the vanos maf sensor or the non-vanos maf sensor:cool:


come on

static
08-12-2007, 09:37 PM
why not wire in an electric supercharger while you're in there?

Moded E30
08-12-2007, 10:11 PM
I'm planning to install SAFC for my turbo project
so this is why i want to do this conversion....

i think i got some tips for the wiring but

someone told me I need to convert and calibrate the output signal also..
is it right???
if yes, how?:confused:

ZiMMie
08-12-2007, 10:39 PM
are u goin piggyback or standalone if so which system are u goin with?

Moded E30
08-13-2007, 01:09 AM
are u goin piggyback or standalone if so which system are u goin with?

sorry about my english *shiner* i didn't understand these words piggy&standalone

static
08-13-2007, 10:33 AM
forget the SAFC and forget the conversion. This is what you need if you're on the budget:

http://www.megasquirt.info/
http://www.e30tech.com/forum/viewforum.php?f=49&sid=a27f249e3ff36a36bce84cf1d86ea8dd

Alex

Moded E30
08-13-2007, 11:39 AM
forget the SAFC and forget the conversion. This is what you need if you're on the budget:

http://www.megasquirt.info/
http://www.e30tech.com/forum/viewforum.php?f=49&sid=a27f249e3ff36a36bce84cf1d86ea8dd

Alex

thank u my dear

i know about this Engine managment,but it will cost me around $1050+shop interest :puke: comparing to it's price $400 *sad*

will the SAFC convert the output signal from MAF to identify it to the ECU?
if yes so i don't need to convert and calibrate the signal ..right? if the safc will do this job:puke:

Moded E30
08-13-2007, 03:05 PM
ok guys im going to buy AEM FIC system

thank u

c ya