PDA

View Full Version : Please Help Me In Chosing Suspension


S54
06-12-2007, 05:29 PM
Hi in market for MZ3 suspension, any recommendations for my coupe will be greatly appericiated thx.

JazzM
06-12-2007, 07:04 PM
TC Kline would be my suggestion. I'm running the Single Adjustable true match kit from TC kline with 550 F and 700 R spring rates. Previously had 450 all around and looking to go to 600 F.

You're more then welcome to drop by any time and we'll go for a spin.

I also have e30 M3 front control arms and offset bushings, TC/K front camber/caster plates and rear eccentric offset bushings for toe/camber adjustment. I have a 28mm H&R front sway bar and removed the rear one. Using Ireland Engineering rear subframe bushings (You have to get those) and the Randy Forbes rear re-enforcement kit with an e36 dual diff cover.

T.

JazzM
06-12-2007, 07:08 PM
There's a member selling his M Coupe (crusher) with the same kit as well. Perhaps you can trade with him to go back to stock and buy his kit?

T.

Punko
06-12-2007, 08:43 PM
I just installed a set of Bilstein and H&R sports, love them.

Ride is firm and tight.

I also did the rear sub frame but would only recommend you DIY if you have some time and willing to "dig" into the car.

Good luck.

330Hi
06-12-2007, 08:56 PM
http://www.heightec.com/shop/images/suspension-trauma.jpg

S54
06-12-2007, 09:01 PM
There's a member selling his M Coupe (crusher) with the same kit as well. Perhaps you can trade with him to go back to stock and buy his kit?

T.


thx Tom for your expertise

S54
06-12-2007, 09:03 PM
I just installed a set of Bilstein and H&R sports, love them.

Ride is firm and tight.

I also did the rear sub frame but would only recommend you DIY if you have some time and willing to "dig" into the car.

Good luck.


Are those adhustable heights if not how much drop do you have ?? thx

Punko
06-13-2007, 08:43 PM
They are not coil overs.

I haven't measured the drop. I believe it is around 1" to 1.5".

Thanks.