PDA

View Full Version : FS: e30 EVERYTHING! euro m20, gc's, stroker, NEW PARTS


ColdAccord
06-08-2007, 08:54 PM
All prices are firm, in U.S. dollars, and do not include shipping. My paypal and e-mail are Nerdigger@aol.com. First come first serve.

SUSPENSION

Eibach Ground Control Coilovers for non-M e30
375 in-lb springs for the front & 500 in-lb for the rear
This kit is set up for Bilstein Sports
Has about 7k on them. Kept incredibly clean, and come with everything they originally did
$695

http://img.photobucket.com/albums/v727/Coldaccord/P4260007.jpg


Bilstein Sports
$250

http://img.photobucket.com/albums/v727/Coldaccord/P5290030.jpg


COMPLETE EURO M20 W/99K!
From my touring. 99k on it. EURO m20. no leaks, doesn’t burn any oil, no issues whatsoever. With clutch, flywheel, and Getrag 260 5 speed transmission, no grinds, no issues. Have pics (they’re just on my external hard drive which is at my parents house). Comes with alternator, p/s pump, starter, etc etc. everything it would normally come with (but no a/c compressor, my touring doesn’t have a/c)

$1300 w/tranny & everything



BALLER M20 PARTS

Mahle 10.2:1 pistons. Brand new, in box. Come with all rings. Use “I” rods (I have a set w/60k on them in the “Used m20 parts” section below)
$550

http://img.photobucket.com/albums/v727/Coldaccord/P4290014.jpg


Fresh cylinder head. Had ~65k on it. Got it cleaned, milled, 3 angle valve job, new valve seals, valves reseated
$525

http://img.photobucket.com/albums/v727/Coldaccord/P4260008.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P4290010.jpg



Catcams 283/283 camshaft
duration duration maximum lift lift at TDC
[0.1mm+cl] [0.1mm+cl] [cl=0] [cl=0]
283/283 246/246 11.90/11.90mm 2.75/2.75mm
new in box
$275


Performance valve springs: full set
“the increased duration of a performance cam with an aggressive grind forces the valve to open and close at a much faster rate. This rapid opening and closing at high RPM can cause "valve float". Valve float is the inability for a valve spring to close the valve fast enough to avoid piston contact.”
$250


m20 rocker arms. Full set. New in box.
$190


e30 rocker arm shafts (includes 2). New in box.
$70


m20 9mm spark plug wires. Barely used.
$80

http://img.photobucket.com/albums/v727/Coldaccord/P4290018.jpg


Barely used SMT-6. Like new
$300

http://img.photobucket.com/albums/v727/Coldaccord/P4290026.jpg


Dinan chip (I can’t remember if this is the real one or the knock-off, so I’ll price it at knock off price). For 173 ecu
$85

http://img.photobucket.com/albums/v727/Coldaccord/P5290051.jpg


Euro 323i flywheel. ~11 lbs, so ~8 lbs lighter than stock m20b25. I had it resurfaced, but it’s got a little surface rust on there. Nothing serious, pictures make it look way more dirty than it is.
$95

http://img.photobucket.com/albums/v727/Coldaccord/P5290046.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290047.jpg

ColdAccord
06-08-2007, 08:54 PM
USED M20 PARTS


351 DME. ~65k.
$50

http://img.photobucket.com/albums/v727/Coldaccord/P5290025.jpg


Alternator. Spins freely.
$35

http://img.photobucket.com/albums/v727/Coldaccord/P5290018.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290019.jpg


m20b25 (all these things have ~65k on them):
intake manifold
$40

Fuel pressure regulator
$15

Fuel rail
$15

injectors
$40

http://img.photobucket.com/albums/v727/Coldaccord/P5290016.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290014.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290013.jpg

valve cover. I cleaned it up just a bit
$40

http://img.photobucket.com/albums/v727/Coldaccord/P5290010.jpg


oil cooler & lines
$60

http://img.photobucket.com/albums/v727/Coldaccord/P5290031.jpg

power steering pump pictured above.
$20



o2 sensor
$45
http://img.photobucket.com/albums/v727/Coldaccord/P5290004.jpg


m20b25 rods 60k on them $50

m20b27 full block; crank, rods, pistons, pan, pump, all together. 155k. $95


ICV
$40

http://img.photobucket.com/albums/v727/Coldaccord/P5290002.jpg

ColdAccord
06-08-2007, 08:55 PM
m20b25 afm (x2)
$25

http://img.photobucket.com/albums/v727/Coldaccord/P5290003.jpg


m20b25 throttle body and throttle position switch
$25

http://img.photobucket.com/albums/v727/Coldaccord/P5290049.jpg


plug wire cover
$10

http://img.photobucket.com/albums/v727/Coldaccord/P5290035.jpg


4.10 open diff. probably leaks.
$45

http://img.photobucket.com/albums/v727/Coldaccord/P5290012.jpg

http://img.photobucket.com/albums/v727/Coldaccord/P5290011.jpg


325ix dipstick
$10

http://img.photobucket.com/albums/v727/Coldaccord/P5290034.jpg

wiring harness from ’88 325ix ~65k
$75

http://img.photobucket.com/albums/v727/Coldaccord/P5290008.jpg

knee bolster. Perfect shape
$30
http://img.photobucket.com/albums/v727/Coldaccord/P4290009.jpg

center console. Perfect shape.
$35
http://img.photobucket.com/albums/v727/Coldaccord/P3120032.jpg


e-brake console. Perfect shape.
$20
http://img.photobucket.com/albums/v727/Coldaccord/P4290022.jpg

ColdAccord
06-08-2007, 08:56 PM
throw back: Early model pass side taillight. Great shape (bought from Jordan). Bought it for my first e30 like 5 years ago and it just sat in my room.
$35
http://img.photobucket.com/albums/v727/Coldaccord/P4290019.jpg


overhead panel, for sunroof cars. Had a bit of discoloration in the center where the rearview mirror goes, I sharpied it. Can’t even see it when installed
$20
http://img.photobucket.com/albums/v727/Coldaccord/CarParts004.jpg


late model 3rd brakelight
$10
http://img.photobucket.com/albums/v727/Coldaccord/CarParts011.jpg




COMPLETE EURO M20 W/99K!
From my touring. 99k on it. EURO m20. no leaks, doesn’t burn any oil, no issues whatsoever. With clutch, flywheel, and Getrag 260 5 speed transmission, no grinds, no issues. Have pics (they’re just on my external hard drive which is at my parents house). Comes with alternator, p/s pump, starter, etc etc. everything it would normally come with (but no a/c compressor, my touring doesn’t have a/c)

$1300 w/tranny & everything

NEW M20 REPLACEMENT PARTS
I have priced everything to be cheaper than the cheapest places to find stuff

bottom end set part number 11-11-9-063-134 $25
head bolt set pn 11-12-1-726-478 $15
head gasket set pn 11-12-9-059-240 $45
main bearing set pn 11-21-1-706-847-6cyl $65
rod bearing set 11-24-1-284-849-6cyl $35
connecting rod bolt set 11-24-1-713-342 $50
rear shock mount set 33-52-1-092-362 $25
transmission tail mount 22-31-1-094-916 (2) $10
guide bushing for driveshaft 26-11-1-207-096 $7
alternator belt 11-51-1-469-236 $3
power steering belt 32-42-1-469-239 $3
a/c compressor belt 64-52-1-466-043 $4
oil pan gasket (not cork, cork sucks) 11-13-1-730-234 $5
valve cover gasket 11-12-1-730-229 $7
clutch master cylinder 21-52-1-156-000 $55
clutch slave cylinder 21-52-1-116-300 $30
sachs clutch kit from bavauto;
“To replace your worn clutch you will have to remove the transmission from your BMW. This is not terribly difficult, but it is time consuming and you wouldn't want to do it twice for the sake of incidental parts. This is why we have put together a clutch kit with all the items you should replace, not just the obvious ones. Our kit contains: an alignment tool, clutch disc, pressure plate, throw-out bearing, rear engine seal, pilot bearing, all transmission seals, exhaust gaskets, and a pivot pin. All our clutch components are manufactured by Sachs, Europe's premier clutch manufacturer. Sachs clutch discs, pressure plates and throw out bearings are original equipment and are engineered to deliver maximum performance.”
Part number CK325I525
$230
engine mounts (2) 11-81-1-132-323 $25 for both
water pump 11-51-9-070-759 $55
coolant level sensor 61-31-1-378-320 $25
Bosch Super spark plugs (set) 12-12-9-061-869 $25
Timing belt kit 09-9320-000. comes with timing belt, tensioner, and replacement sticker $30

bimmer_5er
06-09-2007, 02:18 PM
how many miles on the bilsteins?

ColdAccord
06-09-2007, 02:23 PM
~7k

ColdAccord
06-09-2007, 03:23 PM
ground controls are supposed to be $345. still available, as are the bilstein sports

euro m20 sold, getrag 260 still available
connecting rod bolt set sold
power steering pump sold

Axxe
06-09-2007, 03:30 PM
GC's, are they 2.5" in the rear? Spring length? I can pick up in Buffalo, would save you the hassle of shipping.

bimmer_5er
06-09-2007, 04:34 PM
dibs on bilsteins do you have paypal?

ColdAccord
06-09-2007, 04:51 PM
I'm not sure, I'll measure them next time I go to my parents (where I store all my parts lol).

bilsteins are sold.

giuseppe
06-11-2007, 12:30 AM
engne and tranee still available

ColdAccord
06-11-2007, 02:35 PM
Yes there are. there was a pending sale, but shipping turned out to be too much so they are again available. ready to be picked up whenever, I'm only about 2 hours from Toronto. I may be able to deliver it for a fee.

btw the motor is an m20b25, same as a us 325i/is motor just a little bit higher compression so a little bit more power. hooks up the same, etc

sok
06-12-2007, 12:30 AM
so is the SMT6 just the box and harness? no software?

ColdAccord
07-18-2007, 05:10 PM
still have a lot of this stuff for sale. cam, rocker arms, smt6, ground controls, bilsteins, chip, clutch kit, and a few other things have sold, but I do still have a lot. pm me!!

also, motor and trans are still available! bolt right into a 325i/is