ESS Vortech V2 7 PSI Supercharger Kit for 1995 M3 (413 ECU)

[eurospec#19]

I just finished pulling this s/c kit a few hours ago. All I need to do now is swap out the 24# injectors for the stock 17.5# injectors. Here are pics I took 2 days ago, just before I started removing it:

http://img.photobucket.com/albums/v420/trailerparkboy/sc1.jpg
http://img.photobucket.com/albums/v420/trailerparkboy/sc2.jpg
http://img.photobucket.com/albums/v420/trailerparkboy/sc3.jpg

Only 15 000 miles on this supercharger kit.

This is a COMPLETE kit! ALL brackets and hardware included.

- Vortech V2 blower with polished blower option
- 7 psi pulley
- custom ESS mounting brackets with SC belt tensioner system
- red-top (30#?) injectors
- flexible tubing from HFM to air filter in bumper area
- tubing from HFM to intake manifold
- oil dipstick with oil pickup valve for blower
- custom ESS software chip for 413 ECU
- machined viscous fan spacer
- ESS badge
- ESS installation manual

I will post pics of the uninstalled parts in the next few days.

USD $2500 obo

[eurospec#19]

Plenty of interest but no takers yet.

[ClayMan]

How much work would it be to make this work with an OBD2 328?

[mellobudd]

^^^or an OBD1 325????

[Antz_Marchin]

What kind of power does this put to the road? What does it need to get it on an OBD2 M3??

[eurospec#19]

How much work would it be to make this work with an OBD2 328?No more work than is required on an OBD1 vehicle. I have access to OBD2 software for this s/c kit.

What kind of power does this put to the road? What does it need to get it on an OBD2 M3??M3? Approximately 300 rwhp on a dynojet. You need OBD2 software. As mentioned above, I can get you software.

^^^or an OBD1 325????You could run the OBD1 M3 software included with this kit. It may not be ideal but it would provide a solid baseline for custom tuning.

[mellobudd]

could you post some pics with everything that's included? and IF ever it's going to my 325 are you going to set up the software or do i have to do it myself? i mean, what kind of solid baseline tuning are you going to provide?

[static]

mello, remember, engine first (3.2) ;)

Alex

[eurospec#19]

could you post some pics with everything that's included? and IF ever it's going to my 325 are you going to set up the software or do i have to do it myself? i mean, what kind of solid baseline tuning are you going to provide?I can't provide you with custom software, but you are very fortunate to have Mark D'Sylva near you. He can provide you with custom tuning.

I will snap pics of the disassembled kit later today...

[eurospec#19]

Even more interest...still no takers yet.

[eurospec#19]

There were some requests for a pic of the (uninstalled) s/c components, so here it is.

Not shown but will be included: red-top injectors (still on the motor); ESS instruction manual

Shown but not included: stock 3" HFM

http://img.photobucket.com/albums/v420/trailerparkboy/sckit.jpg

[mellobudd]

mello, remember, engine first (3.2) ;)

Alex

i know*shiner* bwehehehe

[superman123]

now heres the big question why u selling it?

[eurospec#19]

now heres the big question why u selling it?I'm fund raising $10k for a Technique Tuning Stage 2 turbo with all the the goodies (3" exhaust, Spec clutch, etc).

[static]

^^ heh, as they say... once you go boost, you never wanna stop

[eurospec#19]

^^ heh, as they say... once you go boost, you never wanna stopSo true. I just hope my wife doesn't find out. *sad*

[eurospec#19]

bump

[eurospec#19]

bump again

[eurospec#19]

Depost received this morning. I think it's safe to say this s/c kit is SOLD!!