PDA

View Full Version : FS: Solid Aluminum Rear Shock Tower Mounts


M3E36
12-19-2006, 11:13 AM
Hello,

I have a pair slightly used Solid Aluminum Rear Shock Tower Mounts. It will fit E30, E36 and E46. It's in excellent condition. $200.

Pic
http://www.turnermotorsport.com/image/suspension/suspension_racing_rmounts_lg.jpg

Pm me if you are interest.

Thanks

E36is
12-19-2006, 11:27 AM
^^ Noob question..

What do these offer in terms of enhancement and ride?

propr'one
12-19-2006, 12:24 PM
Rommel, when your RSM's are worn, you can get a suspension unload CLUNK going over a bump.

These are an essential suspension component as they are what the suspension is mounted to.

e36's are notorious for not having good rsm's that fail too quickly (they can even lead to having a ripped out subframe) so lots of people upgrade to e46 m3 ones, or aftermarket (like IE), or add z3 re-enforcement plates.

These are more durable than stock.

E36is
12-19-2006, 12:40 PM
^^ thanks Ivan!

topnotchraly
12-20-2006, 09:37 AM
Will these increase the interior noise (over stock units)?

Thanks

M3E36
12-20-2006, 11:06 AM
Will these increase the interior noise (over stock units)?

Thanks

Yes i will make some noise but not too noisey. OEM one are made of rubber, that's why it will worn out. The one i'm selling is made of Solid Aluminum.

Thanks

M3E36
02-22-2007, 06:59 PM
ttt.

paul christians
02-22-2007, 07:49 PM
Rommel, when your RSM's are worn, you can get a suspension unload CLUNK going over a bump.

These are an essential suspension component as they are what the suspension is mounted to.

e36's are notorious for not having good rsm's that fail too quickly (they can even lead to having a ripped out subframe) so lots of people upgrade to e46 m3 ones, or aftermarket (like IE), or add z3 re-enforcement plates.

These are more durable than stock.
it all so you can rebuild or replace bushings from soft to solid ones,but do go solid for the street though...try this two link out www.bmpd.com or www.BavAuto.com out I know there is more for you to look up,but this give a better idea there....cheers...I do have the ones from bmp in my car, and I am using the mid hardness ones too...I would live use the solid ones but you need same give some wear.....does this help anyone out more to what propr-onehas said.....

M3E36
04-11-2007, 12:35 PM
Still available.

M3E36
08-03-2007, 10:36 AM
Ttt.