View Full Version : will these fit my car? offsets ok?
08-14-2006, 02:32 AM
front:17x7 40mm offset
<p>back:17x9 40mm offset
08-14-2006, 03:30 AM
the wheels in the picture are 4 bolt.
But I believe those are ADR, and they should have that style that fits your car.
08-14-2006, 03:38 AM
they would order a 5/120 bolt pattern. it's actually sportmax, i was looking for the adr's @ redline but they told me they dont carry it any more. i went to the next store (wheels direct) that's what i found close.
08-14-2006, 09:36 AM
40 mm should be fine, I believe E36 offset is around 35mm.
08-14-2006, 11:57 AM
35mm is actually really aggressive for an E36.
The fronts will fit fine, but you'll very likely have to roll the rear fenders, especially with 255/40/17 tires. And you're going to have some insane understeer with a 7" front wheel.
08-14-2006, 01:51 PM
meaning i will have a wide cornering with those and probably lose traction?
wheels direct wont roll fenders, see, that what sucks about them. they would probably reduce the tire size to 245's. but i want the 255's could i roll the fenders my self? i know redline does it, but only if you buy the stuff from them i think.
08-14-2006, 02:38 PM
SportMax wheels are REALLY cheap BTW. I hope my friends down there aren't asking you too much for them.
And they had a fender roller, but then someone borrowed it and never brought it back. Never bothered getting another one.
08-14-2006, 11:08 PM
hehe, thanks mystikal, they gave me 1500 for wheels/tires
i see, that's why they wont roll the fenders, my bad..
08-15-2006, 11:32 PM
Yeah, that's a fair deal.
vBulletin® v3.8.1, Copyright ©2000-2017, Jelsoft Enterprises Ltd.