PDA

View Full Version : FS: E30 parts (5spd tranny and diff)


static
05-22-2006, 05:51 PM
Hey, got some parts in great condition (162KKm on all, 'cept brakepads)

5spd tranny (never slipped or grinded): $180
3.73 open diff: $80

or both for $240

325i booster + MC (never gave me trouble, changed for IX one with my swap) - $40 takes those.

used stock brake pads (lots and lots of pad material left on those): $40 for all 4 corners

need them gone

please PM me
Thanks
Alex

static
06-01-2006, 04:11 PM
stuff for sale is still available

Chris de la Cruz
06-01-2006, 04:53 PM
alex if its avaliable in the next month (July) i'll probably take it from you... i'll let you know

beamerboycsl
06-06-2006, 01:05 AM
will that tranny bolt up to a M44 motor?

static
06-06-2006, 01:46 PM
not sure, please ask in the E30 section

scottyp
06-10-2006, 06:14 PM
hey will that tranny work for a 1987 325i?

static
06-11-2006, 11:03 AM
yes it will

static
06-27-2006, 03:12 PM
stuff still for sale (except for the pads)

Alex

T.Dot_E30
06-28-2006, 01:04 AM
do you still have the driveshalf?

static
06-28-2006, 11:52 AM
yes i pm'ed you about it

as i said i am not really sure what model e30 it is from (not from E30m3 that i know for sure, it's looks in good shape tho)
You can have it for $40 and try it out, if it doesn't fit you just return it

Alex

T.Dot_E30
06-28-2006, 03:08 PM
yes i pm'ed you about it

as i said i am not really sure what model e30 it is from (not from E30m3 that i know for sure, it's looks in good shape tho)
You can have it for $40 and try it out, if it doesn't fit you just return it

Alex


Problem is, i dont wanna take apart the car to realize it doesn't fit.

ZiMMie
06-28-2006, 03:21 PM
there should be a part number stamped on it or tag somewhere on the shaft.

static
06-28-2006, 10:17 PM
there should be a part number stamped on it or tag somewhere on the shaft.

problem is the shaft was spraypainted by previous owner(so i cannot see anything on it) . It's been sold to me as a e30m3 shaft, but Charlie told me that the front flange was too small.