PDA

View Full Version : projector conversion on an 98 e39 HELP???


kurupt_k
05-10-2006, 11:27 PM
i bought the projectors w/ angel eyes but they dont seem to fit as well as the stock ones. The projectors are oem but i need help on how to install the angel eyes and where to buy the connectors. it seems that the connectors for the angel eyes and coner markers are different. any advice would be greatly appreciated.

Thanks Chris

DavidM5
05-11-2006, 01:19 AM
Here you go:-

http://www.bmwtips.com/

If you did not have HIDs originally you will get low beam failure warnings on your MID and need to get a resistor made.
Everything you need can be found in the link.

David

kurupt_k
05-11-2006, 02:28 AM
Here you go:-

http://www.bmwtips.com/

If you did not have HIDs originally you will get low beam failure warnings on your MID and need to get a resistor made.
Everything you need can be found in the link.

David

thanks for the advice but i dont mind the warning its mostly the wiring harness that i am looking for, can i purchase it or do i have to make my own?

Rush
05-11-2006, 02:49 AM
I'll check my car, but I'm pretty sure I had some wires spliced ... you can do it yourself.

kurupt_k
05-11-2006, 03:00 AM
I'll check my car, but I'm pretty sure I had some wires spliced ... you can do it yourself.

i appreciate that and also i guess i would just use the connectors it has listed on bmwtips.com?

DavidM5
05-11-2006, 11:03 AM
i appreciate that and also i guess i would just use the connectors it has listed on bmwtips.com?

Yes you can make your own connectors with the parts listed on BMWtips.
It's pretty easy.

Did your car come with HIDs originally?
If not you need to get this part as well:-

http://www.bekkers.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=9xd15555&Category_Code=63120024985d

David