PDA

View Full Version : E36 4 door roof spoiler (Eurostyle Rieger Replica) $75


Miguel
04-02-2006, 12:58 PM
Painted calypso red.
fibreglass.
made for a four door.
pickup in Woodbridge.
$75.
PM me.

a picture:
http://www.gallery-addons.com/gallery/albums/frames/Wood_Frame.jpg

vadim321go
04-02-2006, 03:53 PM
i like the picture

Miguel
04-02-2006, 07:19 PM
i like the picture
thanks, im too lazy to post an actual picture of it so i posted a picture... of a picture.

skperformance
04-03-2006, 01:39 AM
I am interested in taking a look at it to modify it?
Let me know if you ever head to sauga?

Eurostyle
04-03-2006, 02:07 AM
I am interested in taking a look at it to modify it?
Let me know if you ever head to sauga?

You can see one at my shop in Mississauga at anytime! Just give me a call and we can set something up*th-up*

skperformance
04-03-2006, 02:30 AM
If i rememeber , i will drop by tommorow.

skperformance
04-07-2006, 03:10 AM
Great guy and spoiler
thanks,
good luck with the hunt go for the deal its only cleaning .

Miguel
04-07-2006, 03:19 AM
Great guy and spoiler
thanks,
good luck with the hunt go for the deal its only cleaning .
Spoiler sold!

Thanks for the advice... i got all hyped up to buy and my brother shot me down. It appears as though its too much work him :(

Just to give you an idea... check out the damage here:
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58660
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58661
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58662
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58663
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58664
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58665
http://www.maxbimmer.com/forums/attachment.php?attachmentid=58666

skperformance
04-07-2006, 03:44 AM
Man if that is it maybe i should buy it and flip it.
Here is an idea.
Dry wall is dirt cheap and uses screws , you can cut it with an exacto knife and it snaps.
The CATV wiring is just that a mess but nothing to be afraid of.
The bathroom is a mess ,big deal , rip out the walls and screw back new hardy backer if you want to be pimp or basic cement board but drywall was used there and should never be used in a bathroom like that.
The hardest part is to cut the mortar above the exterior wall door. You need to support it with a beam support and jack it back up into level then cut a section out with a saw and hammer in a new 1/4 piece of steel so it can be a load bearing reinforcement which was not done for that entrance.
Really it is not that bad. It also can be done over a few years if you wanted to really do it slowly.
Just strip it all down to the bear walls after an electrician turns off the basement supply then sledgehammer away.
It takes money to make money and if you want to learn and have time then you can save money and make money on top of it.

Justin e36
04-07-2006, 05:26 AM
Man if that is it maybe i should buy it and flip it.
Here is an idea.
Dry wall is dirt cheap and uses screws , you can cut it with an exacto knife and it snaps.
The CATV wiring is just that a mess but nothing to be afraid of.
The bathroom is a mess ,big deal , rip out the walls and screw back new hardy backer if you want to be pimp or basic cement board but drywall was used there and should never be used in a bathroom like that.
The hardest part is to cut the mortar above the exterior wall door. You need to support it with a beam support and jack it back up into level then cut a section out with a saw and hammer in a new 1/4 piece of steel so it can be a load bearing reinforcement which was not done for that entrance.
Really it is not that bad. It also can be done over a few years if you wanted to really do it slowly.
Just strip it all down to the bear walls after an electrician turns off the basement supply then sledgehammer away.
It takes money to make money and if you want to learn and have time then you can save money and make money on top of it.

agreed. it doesn't look like a lot of work. cement board in the washroom and kitchen is now a part of building code too. those look like all little things, can be fixed up in a summer.

skperformance
04-07-2006, 11:46 AM
See i told you it is not that bad , we can;t see the inside of walls but walls can be replaced.
Get a 2-3 contractors to go over and get real estimates on removal not fixing and upgrading.
Maybe you should have a Maxbimmer house meet.
you can have the first one , everyone shows up and you supply the food and we each take a crack at a small demolition job. You'll have the basement gutted in an afternoon.

Chris de la Cruz
04-07-2006, 11:55 AM
Maxbimmer's home make over :D

Miguel
04-07-2006, 02:06 PM
What you guys are missing is the water damage throughout the house (mold?), the attic (who knows what shape), the fact that the house was settling in 2 different directions, the entire basement and probably the 2nd floor needed to be gutted, and the garage ceiling/2nd floor washroom floor most likely needed to be restructured and replaced.... honestly... doing all the work yourself material alone would be $50K. add to that the next 5 years of your life would be spent sucking mold.

skperformance
04-08-2006, 01:03 AM
Then low ball the price to make up the additonal fix's.
estimates are free from contractors