PDA

View Full Version : LSB on LSB interior (?) at cross avenue today


rodo
03-27-2006, 05:30 PM
whos is it? Looked like an intercooler on the front, and blacked out center BBS LM's with polished lip. Anyone?

EMPOWERD
03-27-2006, 05:37 PM
SuperM3's car. Musta just missed you, I was there with Lindsay today at lunch.

kerisabe
03-27-2006, 05:37 PM
whos is it? Looked like an intercooler on the front, and blacked out center BBS LM's with polished lip. Anyone?

Must be Fabio's E46 M3.. Robbie is doin his SC install plus some other goodies...Saw that the other week too.. Unleash the Beast!*th-up*

Putting your summers back on there Rodo??

rodo
03-27-2006, 06:01 PM
no, i was going to the go train and saw it :P I knew super M3 had his LSB e36 m3 on LM's right? and that he had bought an e46 M3 but i dind't know it was this damn sick!

Sickbimmer
03-27-2006, 07:00 PM
*angel*

SickFinga
03-27-2006, 07:35 PM
*angel*

So what are the results? ;)

rodo
03-27-2006, 07:39 PM
dude, you are my hero, i thought your e46 m3 was stock! Is the interior LSB too? or was it grey?

Sickbimmer
03-28-2006, 12:39 AM
My e36 m3 has dove interior and the e46 has LSB. The E46 put down 416rwhp. I hope to get a bit more out of her*par-t*

Maybe Randy can post the video of the dyno session.

paul christians
03-28-2006, 12:48 AM
that is (CRAZY) Fab......sweeeeeeet.......

Hound
03-28-2006, 01:24 AM
damn man nice!!! can't wait to see that one now lol can a ride be aranged lol :D EVIL!!!

Quack
03-28-2006, 01:29 AM
Fab can't wait to test drive your new F/I car :D

Miguel
03-28-2006, 07:33 AM
Jesus... is there any car you wont get blown? Whats next? supercharge your lawnmower? how about you turbo your espresso machine? Bi-turbo'd fiance?

kerisabe
03-28-2006, 07:39 AM
Jesus... is there any car you wont get blown? Whats next? supercharge your lawnmower? how about you turbo your espresso machine? Bi-turbo'd fiance?

:D .....

STALKER
03-28-2006, 08:55 AM
Dinan kit?

Paul540/m3
03-28-2006, 09:33 AM
Dinan kit?

Or Eric (Yansha's) A/A kit?

Rolled_Out
03-28-2006, 01:24 PM
Amazing, now we can run it against the chrome m3 :)

STALKER
03-28-2006, 02:53 PM
is your buddy running the RMS kit? I heard about all the troubles he had with Osh and RMS.

Rolled_Out
03-28-2006, 03:27 PM
is your buddy running the RMS kit? I heard about all the troubles he had with Osh and RMS.
Yehp, looks as though evefrythings fixed though. Should be putting down some unheard of #'s shortly.
Osh will be back up here in 3 weeks.

Sickbimmer
03-28-2006, 04:19 PM
I hope we can all hook up somtime soon*th-up*

Rolled_Out
03-28-2006, 04:35 PM
I hope we can all hook up somtime soon*th-up*
1 BILLION %.

Then we can do a nice photoshoot :)


ps--post a pic of your car w/ lm's :)

Sickbimmer
03-28-2006, 04:57 PM
I'll be picking up the car today, and maybe posting a pick tommorow with THE OTHER S/C LSB M3 ON LM's:D

SickFinga
03-28-2006, 05:02 PM
I'll be picking up the car today, and maybe posting a pick tommorow with THE OTHER S/C LSB M3 ON LM's:D


I hate you.

How come you didnt dyno E36? I know its not cool anymore, but it would be good to know how it compares to E46.

Sickbimmer
03-28-2006, 05:19 PM
I hate you.

How come you didnt dyno E36? I know its not cool anymore, but it would be good to know how it compares to E46.

Maybe I will:huh?: Did you finally get yours dynoed properly?

rodo
03-28-2006, 06:43 PM
i saw sam today and i asked him about ur car i said "thats a sick laguna seca blue e46 m3 you guys have, is it getting a supercharger put on?" and the typical sam response "ya bro" hahaha ****ing love sam

rodo
03-28-2006, 06:45 PM
i took a pic of it yesterday with my phone, do you mind if i post it?

SickFinga
03-28-2006, 07:42 PM
Maybe I will:huh?: Did you finally get yours dynoed properly?

nope. prolly gonna take it out next week, and start troubleshooting.

rodo
03-28-2006, 08:21 PM
i saw it i saw it :P It sounds siiiiiiick, i guess i was the first one to see it, and video it ;) but i won't post it unless he wants me to

Understated
03-28-2006, 09:52 PM
lol i fear for what new moves Tony will put on the Z06 now that it's widebodied :eek:

SickFinga
03-28-2006, 10:03 PM
I have a pic of Tony's widebody Z06 on my phone as well :D I saw him a few weeks ago 2 minutes after he left Carravaggio. I won't post it, but let me tell you, this thing is off the hook!

He already posted pics of his car.

STALKER
03-28-2006, 10:37 PM
Yehp, looks as though evefrythings fixed though. Should be putting down some unheard of #'s shortly.
Osh will be back up here in 3 weeks.
Will be interesting to see how it runs and how reliable it will be, after all the trouble.

Sickbimmer
03-29-2006, 06:07 AM
i saw it i saw it :P It sounds siiiiiiick, i guess i was the first one to see it, and video it ;) but i won't post it unless he wants me to
Post away *th-up* I'll be posting my own pics and vids soon.

rodo
03-29-2006, 08:31 AM
heres a pic

rodo
03-29-2006, 08:35 AM
http://s65.yousendit.com/d.aspx?id=01MYDZKYH518V2F9V7U1EK4NBN


open with quicktime

sicktoy
03-31-2006, 01:43 AM
Yehp, looks as though evefrythings fixed though. Should be putting down some unheard of #'s shortly.
Osh will be back up here in 3 weeks.

Chrome M3, SuperM3, and my s2000.

Fabio, I am glad that your car is running good. You should dump the stg III that I was running before.

Sickbimmer
03-31-2006, 06:23 AM
I'm going to talk to A/A about the software update*th-up* All I need is the 70mm pulley.

Sickbimmer
03-31-2006, 06:24 AM
A pic of the car

Sickbimmer
03-31-2006, 06:16 PM
Yehp, looks as though evefrythings fixed though. Should be putting down some unheard of #'s shortly.
Osh will be back up here in 3 weeks.

What do you figure to the wheel? 500,550, 600rwhp? What did it dyno last. Thanks Dan*th-up*

SickFinga
03-31-2006, 06:32 PM
Fabio, how much boost were you running during dyno?

Sickbimmer
03-31-2006, 11:08 PM
7.5psi

Rolled_Out
04-01-2006, 02:03 AM
Fab, you put down 416rwhp @ 7.5 psi,
the chrome m3 put down 405rwhp @ 7psi, but with stock headers and pulleys and after about 20 dyno runs, she was hot as hell.

Heres the thread.. http://www.maxbimmer.com/forums/showthread.php?t=52789&highlight=dyno

Pm me your #, you should bring your car out to splitfire when we go back and install the new software and put on the headers/pulleys :)
Lookin @ about 3 weeks or so. Osh has to fly up here..

ps--what was your torque like? I'd imagine it would be pretty close to the chrome m3's.
Also, which headers and pulleys are you running?

STALKER
04-01-2006, 02:19 AM
Where do you guys dyno, and do they do AFR too????
That lip is real low on the LSB, you rub anywhere?

Sickbimmer
04-01-2006, 07:03 AM
Dan I'm running

1. AA stg II with 75 mm pulley, Water Alcohol Injection Kit
Rotrex C38-71 Trim Supercharger Active
Autowerke Cast Intake Manifold
Front Mounted air to air Intercooler
HKS By-Pass Valve
Larger Injectors and Spark Plugs
Active Autowerke Mass Air Meter Housing
Supercharger Oil Cooler
K&N Air Filter

2. Supersprint headers (no cats)

3.Eisenmann Meistershaft with 80 mm tip.

Ps. Pej, dyno done at TAG motorsport in Oakville. I havn't scraped anything so far*th-up*

Rolled_Out
04-01-2006, 10:29 AM
Alright Fab, sounds good!
What about your torque? how was it

rodo
04-01-2006, 10:52 AM
damn, id love to have your car, sounds soo sick. Where's TAG motorsport in Oakville?

STALKER
04-01-2006, 11:24 AM
Dan I'm running

1. AA stg II with 75 mm pulley, Water Alcohol Injection Kit
Rotrex C38-71 Trim Supercharger Active
Autowerke Cast Intake Manifold
Front Mounted air to air Intercooler
HKS By-Pass Valve
Larger Injectors and Spark Plugs
Active Autowerke Mass Air Meter Housing
Supercharger Oil Cooler
K&N Air Filter

2. Supersprint headers (no cats)

3.Eisenmann Meistershaft with 80 mm tip.

Ps. Pej, dyno done at TAG motorsport in Oakville. I havn't scraped anything so far*th-up*
Do they do AFR there too? What type of dyno do they use, Im still looking for a quality dyno shop, and Oakville is really close to me so it might be good. Did Sam recommend this place? Thanks.

Sickbimmer
04-01-2006, 11:27 AM
Alright Fab, sounds good!
What about your torque? how was it

My torgue was 312.2 to the rear wheels.

Sickbimmer
04-01-2006, 11:31 AM
Do they do AFR there too? What type of dyno do they use, Im still looking for a quality dyno shop, and Oakville is really close to me so it might be good. Did Sam recommend this place? Thanks.

They do AFR as well, they us a dynojet dyno. It's 2 min from Sams shop, he sends all his cars there.

STALKER
04-01-2006, 11:47 AM
They do AFR as well, they us a dynojet dyno. It's 2 min from Sams shop, he sends all his cars there.
Thanks very much for the info, I will have to check it out for sure.

STALKER
04-01-2006, 11:47 AM
oh, one more, how did you get it into dyno mode, did you use a GT1?

Sickbimmer
04-01-2006, 12:08 PM
oh, one more, how did you get it into dyno mode, did you use a GT1?
To tell you the truth I wasn't present when the car was dynoed, all I know are the results and they used a 4th gear pull. Randy videoed the dyno session, I'll post it as soon as I get it*th-up*

STALKER
04-01-2006, 12:16 PM
To tell you the truth I wasn't present when the car was dynoed, all I know are the results and they used a 4th gear pull. Randy videoed the dyno session, I'll post it as soon as I get it*th-up*
Sam has a GT1, so he must have taken it there with him.

Rolled_Out
04-01-2006, 12:33 PM
heres a quick vid of the 405 run

http://s40.yousendit.com/d.aspx?id=0LW4Q44EXD5340W8AUWLQCV3YN

STALKER
04-01-2006, 02:09 PM
heres a quick vid of the 405 run

http://s40.yousendit.com/d.aspx?id=0LW4Q44EXD5340W8AUWLQCV3YN
Where was that dynoed?

Rolled_Out
04-01-2006, 04:42 PM
Splitfire.

STALKER
04-01-2006, 07:46 PM
Splitfire.
Mississauga?

Rolled_Out
04-01-2006, 07:56 PM
i think it was brampton.. but maybe borderline sauga/brampton

STALKER
04-01-2006, 11:35 PM
Kewl, thanks. I have to get mine dynoed after the rest of the Delage parts are in.