PDA

View Full Version : tools...


330ci05
03-25-2006, 05:50 PM
I'm looking for a 36mm socket, 14mm hex socket,fluid pump and a 0-50lb torque wrench.... anyone know where i could fined those? i tried Canadian Tire and no luck:(

roxy9
03-25-2006, 06:46 PM
canadian tire has a 36 mm socket ijust bought one, 37 bucks though!

its an axle socket, its not in the regular tools, gotta goto the automotive section

14mm hex socket? umm thats about as standard as they come.. should have them at any place that sells tools, also try 9/16

330ci05
03-25-2006, 07:04 PM
canadian tire has a 36 mm socket ijust bought one, 37 bucks though!

its an axle socket, its not in the regular tools, gotta goto the automotive section

14mm hex socket? umm thats about as standard as they come.. should have them at any place that sells tools, also try 9/16


i was looking in the display they have and i couldn't find either :confused:


thanx all look again :D

ZiMMie
03-25-2006, 07:07 PM
i was looking n the dasplay they have and i couldn't find either :confused:


thanx all look again :D

4pc Axle Nut Socket Set Part #648635
3/8”Dr Calibrated from 5 to 80 foot pounds, 0.7 to 11.1 meter kilograms 644045

wat do u need a 14MM Hex for? Tranny or diff?

330ci05
03-25-2006, 07:16 PM
4pc Axle Nut Socket Set Part #648635
3/8”Dr Calibrated from 5 to 80 foot pounds, 0.7 to 11.1 meter kilograms 644045

wat do u need a 14MM Hex for? Tranny or diff?



thanx, its for the diff....

BMW Guy
03-25-2006, 07:28 PM
Princess Auto has then as well. Alot cheaper if cost is an issue.

330ci05
03-26-2006, 10:04 AM
Princess Auto has then as well. Alot cheaper if cost is an issue.


i called them and the lady told me that they dont have 0-50lb torque wrench and that they only sell sockets in a set......i guess i should go there and see...

330ci05
03-26-2006, 02:52 PM
i found everything other then the 14mm hex :(:( i can't find it, no1 seems to have it:mad: anyone know where i could get it from??

thanx

arsevader
03-31-2006, 12:29 PM
Canadian Tire does also sell a 36mm regular chrome socket. I bought one last year for doing front wheel bearings. It wasn't that expensive.