PDA

View Full Version : OMG take a look at this swap!!!


635CSi
10-23-2005, 11:27 PM
Just found this out but I can put an 850CSi motor and tranny into the 6er *par-t*

http://www.mwrench.com/m6v8/

bmdbley'sBro
10-24-2005, 01:29 AM
good stuff...

but dude has Zero pictures of the "whole car" :(

Ant118
10-24-2005, 01:43 AM
um thats not a 850CSI motor, the 850 is a V12 not a V8

Antz_Marchin
10-24-2005, 01:50 AM
There's one of each....the little icon on the bottom is for the 12

T.Dot_E30
10-24-2005, 01:50 AM
um thats not a 850CSI motor, the 850 is a V12 not a V8

You clicked on the wrong link, there is one with a LS6 swap, then at the bottom there is the v12 swap.

Ant118
10-24-2005, 01:52 AM
oh my bad

635CSi
10-24-2005, 02:33 AM
good stuff...

but dude has Zero pictures of the "whole car" :(

Its actually set up on a shell just to show clearances

Eurostyle
10-24-2005, 02:54 AM
V12's have been stuffed in E30's many times...so in a 6er should be no problem at all...

BigD
10-24-2005, 03:31 AM
There's one of each....the little icon on the bottom is for the 12

It's still not a CSi motor. It's a regular M70.

635CSi
10-24-2005, 03:22 PM
It's still not a CSi motor. It's a regular M70.

The S70 and M70 both have the same clearences and same mounting points so there still should'ent be any issues