PDA

View Full Version : FS: Supersprint Gen3 e46 M3 headers - GB


JazzM
10-11-2005, 03:54 PM
Hi All, A friend of mine is a distributor for supersprint and I just got a set of these getting it installed today on my car. I will post installed pictures and initial feedback.

I can get these for $1,500.00 CND ea. on an order of 10 or more! That's close to a $1,000.00 savings.

These are original SuperSprint Generation 3 Headers for e46 M3 3.2L i6 engines.

Note: You will need to get a set of catalytics as they remove the cats from the headers. It is not legal to run without headers on the street. Track only.

Performance gain is around 20-25 RWHp with track pipe and performance muffler.

Relocation of O2 sensors is not required as they plug into stock locations unless you get a set of cats. Software is recommended.

I can also get these ceramic coated for an additional $250.00 CND.

I can dropship for free within canada. ;)

Terms and payment: After we get 10 people I can order these. I will require a 50% deposit with the remainder due upon delivery. Delivery will be within 2 weeks after the order goes through. Shipping free within canada.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Best regards,

T.

JazzM
10-11-2005, 03:57 PM
posted on e46toronto.ca as well. I will keep the list of buyers synchronized.

FYI if we hit 20, I can get another $100 off ea.

T.

Paul540/m3
10-11-2005, 04:27 PM
Try tuningemotion.com , lots of m3's there

JazzM
10-11-2005, 04:28 PM
Thanks... I'll post there as well

T.

STALKER
10-11-2005, 06:03 PM
If I didnt already have my BHS headers and cats, I would be all over this. good luck.

JazzM
10-11-2005, 07:09 PM
Thanks Pej. How is the delage intake working out?

T.

STALKER
10-11-2005, 07:18 PM
Good so far, I have not been in the GTA or driven the car for about 2 months now though, so itching to drive it. I got a Delage 290/282, a Delage 3.91 gears that need to be installed too, doing some research where to have them installed. Need to find someone really competent.
Good luck with the GB.

JazzM
10-11-2005, 07:29 PM
Yeah, I have a set of supersprint cams that need to go in as well... are you replacing your rocker arms as well?

I'm going to get it done at Munich Motors. They are very knowlegable with regards to M3s and have done my conversion.

T.

STALKER
10-11-2005, 08:03 PM
Im gonna look into Munich. Right now Im leaning towards Engineered Automotive, but they want a fortune. Im gonna replae my rocker arms too, espcially since my new cams are pretty aggressive. I rmember you recommened Munich before, I have never been there nor had any work done there. I will call them and talk to them, do they have and email, web address, phone number?

glenspeed
10-11-2005, 08:24 PM
Tom, can't wait to hear/see your car on the 24th!

STALKER
10-11-2005, 08:26 PM
Tom, can't wait to hear/see your car on the 24th!
BBBOOOO, lol, inside joke with Glenspeed.

STALKER
10-11-2005, 08:48 PM
Tom, so you have a pic of these?

JazzM
10-11-2005, 08:59 PM
Im gonna look into Munich. Right now Im leaning towards Engineered Automotive, but they want a fortune. Im gonna replae my rocker arms too, espcially since my new cams are pretty aggressive. I rmember you recommened Munich before, I have never been there nor had any work done there. I will call them and talk to them, do they have and email, web address, phone number?

Phone no. is 416 665 1605. Ask for Mike (owner) tell him that Tom sent you... Perhaps we'll do the cams at the same time.

Engineered Automotive is crazy expensive. Mike and his mechanic do excellant work. I highly recommend them.

T.

JazzM
10-11-2005, 08:59 PM
Tom, so you have a pic of these?

Will have pics and I'll post them tomorrow.

T.

JazzM
10-11-2005, 09:00 PM
Tom, can't wait to hear/see your car on the 24th!

I'm also going up on the 15th... Should be a blast ;)

T.

STALKER
10-11-2005, 09:15 PM
Phone no. is 416 665 1605. Ask for Mike (owner) tell him that Tom sent you... Perhaps we'll do the cams at the same time.

Engineered Automotive is crazy expensive. Mike and his mechanic do excellant work. I highly recommend them.

T.
the install has to be done perfectly cause the double VANOS. I will be back in town in Nov I think I should go check them out. Two for one discount, lol.

JazzM
10-11-2005, 11:32 PM
the install has to be done perfectly cause the double VANOS. I will be back in town in Nov I think I should go check them out. Two for one discount, lol.

Yes, I know and the solid lifters as well. When the cams are changed you have to do a valve alignment too. I'm aware that its a complicated procedure ;). Two for one sounds good... That means you're paying for both of us right? :cool:

T.

STALKER
10-12-2005, 12:38 AM
Yes, I know and the solid lifters as well. When the cams are changed you have to do a valve alignment too. I'm aware that its a complicated procedure ;). Two for one sounds good... That means you're paying for both of us right? :cool:

T.
I was thinking, since you already know Mike, you would get this one. So you are going to have the cam work done at Munich and you are 100% sure they can do it right?

JazzM
10-12-2005, 07:39 AM
Yes. 100% certain.

T.

JazzM
10-12-2005, 11:07 AM
Here are some Pictures:

Old vs. New:
http://www.fieldofwebs.com/demo/headers/new_vs_old.jpg

Headers Removed:
http://www.fieldofwebs.com/demo/headers/no_headers.jpg

T.

JazzM
10-12-2005, 11:20 AM
Yes, just confirmed they are 043901 - stamped right on the box. My bad I should have checked myself. They are GenII. My supplier was swearing to me they are gen3. :mad:

T.

JazzM
10-12-2005, 11:27 AM
Just found out that BMP is also selling these at a discouted price of $1,619.94 USD

http://www.bmpdesign.com/product-exec/product_id/1511/category_id/100/search_year/2001/search_model/86

I guess they are clearing out the inventory. I confirmed with my supplier that they are Gen2 and I can get one off orders for anyone still interested at the $1,400.00 CND each price with shipping in canada.

What a lousy day, it started off good, went by the shop to see how the install is going and now this. Thanks glenspeed for pointing that out. I really appreciate it and its good to be the guinny pig ;)

T.

JazzM
10-12-2005, 11:34 AM
FYI Package also includes a new set of 6 gaskets for the exhaust manifld, longer stud bolts due to thicker flangs. And a new set of mid section-to-header bolts. This is a $90.00 value since the gaskets alone are $11.00 each at the dealer.

T.

STALKER
10-12-2005, 12:17 PM
Yes. 100% certain.

T.
any idea how much for cam install. So sorry for the OT, BACK TO HEADER GB!!!!

JazzM
10-12-2005, 12:28 PM
I just called him. $700 for the cams install ea. if we both do it there (Now we're doing Group Installs... LOL). Ok back to the Group Buy. Who wants headers!?!

T.

JazzM
10-12-2005, 01:56 PM
Pictures of headers con't

O2 flanges:

http://www.fieldofwebs.com/demo/headers/o2_1.jpg

http://www.fieldofwebs.com/demo/headers/o2_2.jpg

T.

JazzM
10-12-2005, 02:00 PM
Pictures of headers con't

O2 flanges:

http://www.fieldofwebs.com/demo/headers/o2_1.jpg

http://www.fieldofwebs.com/demo/headers/o2_2.jpg

T.

STALKER
10-12-2005, 02:35 PM
I just called him. $700 for the cams install ea. if we both do it there (Now we're doing Group Installs... LOL). Ok back to the Group Buy. Who wants headers!?!

T.
Thats a champ price, EA wanted $2500!!!!!

STALKER
10-12-2005, 02:48 PM
I just called him. $700 for the cams install ea. if we both do it there (Now we're doing Group Installs... LOL). Ok back to the Group Buy. Who wants headers!?!

T.
Im always nervous about using a new shop, especially with such a important install, but you seem very confident with them, and the price is amazing.
HEADER GB< BUY THEM.

JazzM
10-12-2005, 03:15 PM
Thats a champ price, EA wanted $2500!!!!!

Price doesn't include parts (gasket, rocker arms, etc...) only labour.

T.

STALKER
10-12-2005, 03:23 PM
Price doesn't include parts (gasket, rocker arms, etc...) only labour.

T.
Thats still hell of a lot cheaper than EA, they wanted $2500 just for the install. Did you do your gears there too? I have a Delage 3.91 that has to go in too?


SS HEADER GB!!!!!

JazzM
10-12-2005, 03:49 PM
Yes, they did my gears too... I have a 4.10. They did another set of 4.10 gears on the owners M3. I got those for him from kinetechnik.

T.

STALKER
10-12-2005, 04:38 PM
Thanks for the help Tom. I think I will give Munich a try then.

JazzM
10-12-2005, 05:40 PM
Ok, I'm not selling these headers any more... they are not genuine Supersprint as was brought to my attention and I will be notifying my supplier of this.

T.