PDA

View Full Version : What is this? Where can I find one?


Karim@Corner73
03-10-2005, 09:30 PM
http://www.ece.mcgill.ca/~nelgar1/IMGP0248.JPG

10mm

krp_e36m50
03-10-2005, 10:19 PM
umm, if you don't know what it is, why do you want to find one?

///Maluco
03-10-2005, 10:42 PM
What the diameter of the thread?
We use similar fasteners (M5 thread = thread diamter of 5mm) and screw the coarse thread into our front skirts. This allows the part to now have a threaded stud which would go through the bumper and get fastened behind with a nut.

Karim@Corner73
03-15-2005, 06:23 PM
What the diameter of the thread?
We use similar fasteners (M5 thread = thread diamter of 5mm) and screw the coarse thread into our front skirts. This allows the part to now have a threaded stud which would go through the bumper and get fastened behind with a nut.



It is an M5 thread. 10mm nut

Where do you get them from?

I checked at a couple of hardware stores but no luck :(

Bill Gates
03-15-2005, 06:32 PM
you can try fastener places like Fastnal and Brofasco.

Karim@Corner73
03-17-2005, 01:36 PM
you can try fastener places like Fastnal and Brofasco.


Thanks *th-up*