PDA

View Full Version : Repairs


jm1602
08-28-2004, 09:32 PM
Had this horrible screeching sound from the tranny on my '02. So here are some shot of the repairs. First on is of the car jacked up with one wheel free so the drive shaft can be turned to get at the drive shaft bolts.

jm1602
08-28-2004, 09:36 PM
old and new transmissions. The one on the left is the original, the one on the right is out of a '75 2002 cleaned up and ready to go in. Turns out it was trash so we had to pull it out and put the original back in. Not fun I tell you.

jm1602
08-28-2004, 09:41 PM
That went bad. Supposed to be a one piece part like the one in the background but this one was spinning around the cylinder which was the cause of the screeching.

jm1602
08-28-2004, 09:43 PM
Of the old and new Release bearings

jm1602
08-28-2004, 09:47 PM
Once you have the exhaust and drive shaft out and the tranny off this is what you're looking at.

jm1602
08-28-2004, 09:51 PM
gasket and rear crank seal were both leaking and were replaced. Needed the BIG breaker bar to release the flywheel bolts let me tell you.

Girly Girl
08-29-2004, 12:57 AM
Post a pic of the 2002! lets see what this all went in to!

tominizer
08-30-2004, 10:49 PM
I emailed you about the tranny.................... let me know.

jm1602
08-31-2004, 09:58 PM
Thanks for the offer, good to meet you, I'll let you know about the tranny shortly. I'm gonna post my Marcus pictures here tonight to stay tuned.