PDA

View Full Version : billet dynalite II 4-pot calipers and pads (wilwood)


jeremy
07-26-2004, 10:02 PM
up for grabs is a set of BRAND NEW billet dynalite II calipers and pads made by wilwood...

i bought these to use for a BBK i was building.. but as you know i am/will be parting the car...

they are brand new in the box and are designed for a rotor width of up to 1" ....the piston diameters are 1.75"...

500.00 for the calipers and pads..

here is some info:


Billet Dynalite Caliper Highlights:

The Billet Dynalite caliper is powerful, compact, and super lightweight. Advanced computer engineering keeps this caliper extremely rigid resulting in incredible brake torque at a bare minimum in weight - only 2.5 pounds. Internal fluid crossover eliminates external tubes and the four position, two-piece bleed screws allow for convenient mounting and easy bleeding. The Billet Dynalite uses standard quick change Dynalite pads, deep cup stainless steel pistons and high temperature seals, and has a black anodized finish. The time proven Dynalite caliper design is stronger and lighter than ever - ideal for Late Models, Modifieds, Sprints, Road Racers and Dragsters.


http://www.wilwood.com/001_TJM/calipers%20folder/calipers/calipers/bdc/pic_big.jpg

greekthang
07-27-2004, 10:26 AM
Hey Jeremy will they fit my car ?? 1996 e36 328is

Miguel
07-27-2004, 10:32 AM
This has Ryan's (Slowerd) name all over it... PM him!

jeremy
07-27-2004, 11:16 AM
Originally posted by greekthang
Hey Jeremy will they fit my car ?? 1996 e36 328is

as longs as your rotor thickness is 1" or less....KEEP IN MIND, you will have to make some carrier brackets up for the caliper...

jeremy
07-27-2004, 01:25 PM
^

punnzzells
07-27-2004, 04:57 PM
would these fit an e30 m3? I am wondering how much $ you are going to make me spend...

:D

mike.

jeremy
07-27-2004, 05:00 PM
Originally posted by punnzzells
would these fit an e30 m3? I am wondering how much $ you are going to make me spend...

:D

mike.

as long as the rotor width is 1" or less ...YOU WILL HAVE TO MAKE CARRIER BRACKETS though....any machine shop could do that if you give them the templates/measurements

jeremy
07-27-2004, 07:29 PM
to the top

jeremy
07-27-2004, 10:28 PM
mmmmm billet dynalite :)

jeremy
07-28-2004, 01:15 PM
piston shot
http://maxbimmer.com/forums/attachment.php?s=&postid=426504

SpoolinS6
07-28-2004, 01:30 PM
are these universal man ?

jeremy
07-28-2004, 05:04 PM
YUP...they are not designed for any specific vehicle...they will fit an ABUNDANCE of different vehicles...with a maxium rotor width of 1" ...

you will simply need to make some carrier brackets for them..

jeremy
07-28-2004, 07:21 PM
bump

jeremy
07-28-2004, 09:26 PM
no one wants to increase their stopping power ?

jeremy
07-29-2004, 06:58 PM
stop on a dime, all the time :D

Big Chin
07-29-2004, 11:09 PM
These are hot.. I want them but I need new pads and Rotors.. and I don't think it will clear my rims.. Bump for a hot set of Calipars..

jeremy
07-30-2004, 12:57 AM
thanks for the bump

*bump*

jeremy
07-30-2004, 07:32 PM
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

jeremy
07-31-2004, 01:21 PM
B^U^M^P

Justin e36
07-31-2004, 01:40 PM
same.. worried about them clearing my rims.

how much would it cost to make the custom carrier brackets?

jeremy
07-31-2004, 01:48 PM
does someone have a stock e36 caliper they can measure ?

carrier brackets price will depend on where you go and what material you have them made in...i would ask t-spec or windsor318is...they are both machinists..there is not much to them....i could ask a couple machine shops i deal with...

punnzzells
07-31-2004, 02:43 PM
damm man...

those brakes are TIOGHT!

I held them in my hand and I was soooo dam tempted... they are light as a MOFO ... i say that a woman's D cup breast is heavier...

:D

Jeremy, if you can wait 1.5 - 2 weeks.. I think that I am going to take em....

Mike

punnzzells
08-01-2004, 01:11 PM
pm me please... I have found the bracketry for these brakes and I want em....

pm me ..

thanks,

Big Chin
08-01-2004, 02:15 PM
Wait is it 500 for all 4 Callipers and pads or just for 2?

jeremy
08-01-2004, 08:00 PM
Originally posted by punnzzells
pm me please... I have found the bracketry for these brakes and I want em....

pm me ..

thanks,

sending pm

Big Chin
08-01-2004, 09:16 PM
Jeremy is it 500 for 4 Callipers and pads or just for 2?

jeremy
08-01-2004, 11:04 PM
it is 500 for the TWO calipers and a set of pads

sorry but they're now

SOLD

jeremy
08-10-2004, 08:22 AM
FOR SALE AGAIN

buyer had something come up..

jeremy
08-29-2004, 11:32 PM
still for sale

biotek
08-30-2004, 01:22 AM
You got PM

T-spec
08-30-2004, 03:46 AM
Originally posted by jeremy
does someone have a stock e36 caliper they can measure ?

carrier brackets price will depend on where you go and what material you have them made in...i would ask t-spec or windsor318is...they are both machinists..there is not much to them....i could ask a couple machine shops i deal with...

Not too much my ass! It took me 2 designs and and about 22hours to get the caliper brackets perfect for my 996 brakes,
and sorry but I dont have enough time to make stuff for anyone else right now.

I am putting my wilwood on the rear but whoever buys these I suggest you get the larger M3 rotors(you can get spacers for those wilwoods to fit any size rotor) the bracket will be somewhat easier to make.

I will check tommorow just how hard it would be to put these on the E36 fronts with an M3 rotor

jeremy
09-01-2004, 08:19 PM
SOLD....for real this time :D