PDA

View Full Version : Fender Rolling Shop in Niagara Region


RevShoT
07-15-2004, 01:00 PM
i cant seem to find a shop in the Niagara Area who does fender rolling, n e know of a shop or someone that knows how to do it and has the tools?

thanks

qimis
07-15-2004, 01:04 PM
i just rolled my fenders last weekend. pretty easy job ! :)
mallet + heat gun + extra careful + patience = *th-up*

Justin e36
07-15-2004, 04:14 PM
qimis.. pics of how it turned out?

qimis
07-15-2004, 05:35 PM
i have it somewhere ... :confused:

qimis
07-15-2004, 05:38 PM
ah ... here we go :cool:

RevShoT
07-15-2004, 06:06 PM
i dont think i would trust myself to do it, i just want a pro to do it with the proper tools


looks good though

Justin e36
07-15-2004, 06:09 PM
nice.. wanna do my fenders? :D

qimis
07-15-2004, 06:29 PM
sure ! hehe ... i'll do it, i just love doing it hehe ... i dont know why though *shiner*

M50E30
07-15-2004, 07:35 PM
Hey man. Nobody down here has the proper tool. You have to go up to Mississauga and pay big $$$.

:huh?:

RevShoT
07-15-2004, 08:14 PM
how much big $$ in missauga we walkin here?

M50E30
07-15-2004, 09:39 PM
Originally posted by RevShoT
how much big $$ in missauga we walkin here?

Wheel and Tirezone charges $100 for a pair of fenders.......well thats what I found when I searched it.

RevShoT
07-16-2004, 07:29 AM
that it? 100 bucks dosent seem too bad, when u said big bucks i thought u were talkin 300 bucks
i just want the back quarters rolled

ill check them out when im ready

M50E30
07-16-2004, 07:38 AM
Originally posted by RevShoT
that it? 100 bucks dosent seem too bad, when u said big bucks i thought u were talkin 300 bucks
i just want the back quarters rolled

ill check them out when im ready

$100 for about 30 min. worth of work is kinda expensive...........well I guess that isn't too bad since we drive BMW's.

Just kidding. I wish someone on this board had one of these so they can charge less.......
http://www.robsaudiworld.com/ROBSFENDERROLLER.jpg
http://www.bmw-m.net/Gallery/images/fender_roller1.jpg

Sunapollo
07-16-2004, 08:18 AM
Where is this Wheel and Tirezone place ? I need to roll mine ...

Justin e36
07-16-2004, 09:14 AM
I want to roll all 4 fenders.
my problem is that one of my rear fenders is starting to bubble up already... and I won't be getting a body/paintjob till next summer. >_<

RevShoT
02-15-2005, 10:05 PM
bringing thread back from the dead

need shops's #!!

BMWF1
02-15-2005, 10:09 PM
i just rolled my fenders last weekend. pretty easy job ! :)
mallet + heat gun + extra careful + patience = *th-up*

you cracked your paint, lets not lie now *no-no*

BMWF1
02-15-2005, 10:11 PM
$100 for about 30 min. worth of work is kinda expensive...........well I guess that isn't too bad since we drive BMW's.

Just kidding. I wish someone on this board had one of these so they can charge less.......
http://www.robsaudiworld.com/ROBSFENDERROLLER.jpg
http://www.bmw-m.net/Gallery/images/fender_roller1.jpg

i believe adriano has/had one of those. I BELIEVE is the key words though

RevShoT
02-16-2005, 12:43 AM
does anyone have the shop's phone #

it would cost more money in gas to see adriano then to just pay a guy to hook me up

mpower1226
02-16-2005, 01:11 AM
i know a shop in richmondhill area, but it will be little far from where you live.

E36er
02-16-2005, 01:28 AM
can someone tell me whats this does? does it just smooth them out?

windsor318is
02-16-2005, 05:08 AM
you a ****en mallet, the tool is shit

RevShoT
02-16-2005, 01:03 PM
can someone tell me whats this does? does it just smooth them out?

there is a small lip on the inside of the fender, when you get wheels and tires that are big enough to start rubbing against that lip, you can roll the fender as in bend that lip upward and make about 1/4" of space extra for clearance

DbIiRrTdY
02-16-2005, 01:38 PM
I had my fenders rolled at wheel and tire zone in mississauga - for 110 bucks. The price changes based on who you are - not so nice.

Originally he was charging me 150 for both rear fenders and 30 minutes of work that comes out to 300$ per hour until I said i knew someone on the board then it was down to 110$ - still 220 big ones an hour. Most bodyshops/mechanics charge way less than that 70 - 80 bucks an hour. It is not like *they* have a special skill just the right tool.

If someone was a little enterprising on this board they could buy the tool then rent it out to people for a day and still probably make some coin.

SkycityBMW
02-16-2005, 02:26 PM
Here's one . . buy it and let people borrow it . .

http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemID=6159&itemType=PRODUCT&RS=1&keyword=fender+roller

Jim .E.
02-16-2005, 02:51 PM
On Ebay (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7953779135&category=33644&sspagename=WDVW)

its 192.50 U.S. right now...good luck

Jim .E.
02-16-2005, 02:53 PM
oh and theres only 23 hours left...in other words u buy it by tomorrow 2:00p.m. or it goes to someone else...

and heres a tip guys...jus f*ckin buy it...4 ppl can pitch in $50-$70 together and buy it, you guys can keep it within Max as well :idea: Group Buy Anyone?

Adriano
02-17-2005, 03:13 PM
OMG!!!!!!!!!! For that price, I can make them!!!!
Listen to Al, trust us, we have used the damn tool and it is a piece of shit. We waited to get it from the Tire Rack and we ended up using a Licksy mallet.

Hey Al, remember when we were wacken it at 1am sweaten our balls off?
(WOW that doesn't sound good)LOLLOLOL

///MsAniTy
02-17-2005, 05:54 PM
hey rev shot just wait until nice weather comes along and then use a baseball bat.

qimis
02-17-2005, 09:28 PM
you cracked your paint, lets not lie now *no-no*

yes, i did on my first try. not on the second one though.

the rears were just fuked since my fenders were fibreglass + bondo + metal when i bought it.
*sad*