View Full Version : turbo spool

05-13-2004, 08:29 PM
could a non waste gated turbo be spooled to make boost by an e30 if the exhaust a/r is 1.60 and the compressor is .42 a/r ???

could an e30 get the large 1.60 a/r (exhaust) to create boost?

or is that asking to much?

05-13-2004, 10:44 PM
man i thought with the knowledge of building an 800 hp m3 you would know these things, also have you bought that book, stop wasting time man! go get it, the best 20 bucks you'll spend. then you dont have to lie about your 250 hp na 325e, and your 800hp m3 with two turbos. you have dreams man and that is all they are...go buy the book and get some knowledge. this is talking to you objec, and by the way you cant weld steel to aluminum, no matter what you say. the book is maximum boost by corky bell. it tells you how turbos work, since you have two on an s14 and you still dont know, so read something and learn something.

05-13-2004, 10:46 PM
by the way i will hope that slowered will race you, he has a 500hp 318, and i will bet that the whole car is aluminum welded to steel and he smokes you!

05-14-2004, 12:28 AM
can the replys be commets only in regard to the 1st question.


05-16-2004, 01:18 AM
i assume you're talking about an m20b25?

whatever engine, that exhaust a/r is WAY too big; probably won't spool at all. i'd look for something around .60-