PDA

View Full Version : I NEED 325i block


ColdAccord
04-25-2004, 01:49 AM
I need an m20b25 complete block, with rods pistons and crank. I also need the accompanying afm. I am in Buffalo, and can come pick up no problem.

DevInAz
04-28-2004, 05:20 AM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33613&item=2475473997&rd=1 for the block


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33623&item=2473161187&rd=1&ssPageName=WDVW for the pistons

punnzzells
04-28-2004, 04:29 PM
come drive up to Toronto.... Topseed has a 2.7 litre block... make a stroker out of your car!

The super E motor is mine! Don't touch!

:D

Mike.

ColdAccord
04-29-2004, 07:37 AM
Originally posted by punnzzells
come drive up to Toronto.... Topseed has a 2.7 litre block... make a stroker out of your car!

The super E motor is mine! Don't touch!

:D

Mike.

that block on ebay is for local pickup only, won't ship

and good luck with the stroker. I've had all this shit sitting here for so long and can't use it, cause I can't find pistons. I have a 2.5 block, head, throttle body, intake manifold, uncut harness, ecu, etc etc

and a whole seperate 2.7 engine

and neither of them are worth anything because I can't find any pistons. I could do the stroker with super eta pistons. but that's dumb low compression ratio, that's just retarded to run that low cr without boost. it's insane trying to find euro pre 5/85 525e pistons, and it's a bitch to find euro super eta pistons (i think they may yield a bit higher cr than u.s. ones).

that's why I just want to swap in a straight 2.5, do the m30 afm, get 19 lbs injectors, already have the adjustable fuel pressure regulator. and I'll buy a chipped 173 ecu, and probably an exhaust

but f this car for fast performance. it will handle great, but these things just aren't worth it if you want a fast car

so yesterday i bought a new car, that'll be my fast car lol