PDA

View Full Version : I want a S52 where do i start?


AR13LLE 9
04-20-2004, 04:49 PM
hello people of bimmer nation i knoe some of you guys got S50 and S52 engines . Where do i start? Thanx!:confused:

BimmerMan
04-20-2004, 08:11 PM
start by taking out your m20 :D

lvan
04-21-2004, 12:09 AM
most of them have S50 .......I think s52 is euro engine with 321 hp......if so too expensive to maintain it here...in can

Jon@Bimmersport
04-21-2004, 12:59 AM
he is in US so im guessing he's refering to the US spec M3? because down there they call it S50 for 3.0L and s52 for 3.2L M3 motors...

nice ride, awesome in fact..

you need a bunch of conversion parts either way you go..i'll start you off from what i can remember..

E30 IX brake booster
E34 oil pan
E28 Master cylinder (this and the E30 one might be mixed up)
i suggest you get the M motor mounts, i think you need an E34 M5 mount and some other mount (off memory..which sucks)

and a few other parts...if you get the S52 you need OBD1 conversion parts:

OBD1 intake manifold
OBD1 ECU
OBD1 wiring harness

i think theres something more, and this can all be taken off an E36 325 or 3.0L M3...also if you get a S52 i suggest getting an 3.0L M3 or 325 throttle body because the non ACS-T throttle bodies flow better. good luck*th-up*

BimmerMan
04-21-2004, 02:07 AM
Good work jon. The motor mounts I used are e34 m5 and e28 m5. As for the master cylinder, I am running my e30, and an e21 brake booster (couldn't get an ix one)

lvan
04-21-2004, 03:58 AM
he is gonna have same ride as Jeremy