View Full Version : Results with offset m3 CA bushings?

03-03-2004, 09:10 AM
While under my car the other day, I decided to finally do something about those damned cracked bushings that I always have to look at.
It looks like my main problems are CA bushings and swaybar bushings, but I was curious if anyone has had problems with the increased caster on the m3 bushings, and if people usually go for Poly, or just oem bushings?

03-03-2004, 09:00 PM
i am waiting to do this, i was going to go with poly and aluminum control arms for the m3, they are supposed to be bolt in place of the steel ones and are fairly cheap ($175/each). they say that by using the m3 bushings that you will have increased stability at higher speed than with the stock ones. i was going to use poly because i am not going to do the job again later (do it right the first time), plus the rigidness of the poly will help with handling. the only thing is i was also wondering if the increased caster will adversly affect my car being lowered 2.5 inches, i think that it would help out but i dont specialize in suspensions.