PDA

View Full Version : I can't get certain frequincies?


ierrahh
02-15-2004, 04:27 AM
I have a Pioneer Mosfet Premier 50Wx4, a 1000 watt alpine 2 Ohm sub in a Bass Works box and a Jbl 2 Ohm 400 watt amp. For some reason or another I can't get certain bass frequincies through the sub. In the song STAN from Eminem the bassline, as an example, is only heard during the lower noted parts, any suggestions on what is wrong, I've tried everything.

Jase
02-15-2004, 04:42 AM
may be the amp. Or possibly the signal from the deck.

ierrahh
02-15-2004, 04:58 AM
but I'vwe tried every configuration I could think of still no go

Mystikal
02-15-2004, 01:56 PM
The low-pass crossover on the amp is set too low. Turn it up 20hz or so and try again.

Mystikal
02-15-2004, 01:58 PM
Note also this problem wouldn't be so obvious if you had better midbass in your car's system. As it is now the sound is VERY strong below 100hz but from there to maybe 1k there is no real power. You really need to change your interior speakers' setup. This particular song really highlights the issue, but it's there no matter what you're playing.