body kits

[christian]

hey guys im looking for a good looking body kit for e30's 84'-91' i found a few by reiger tunning but i want to see some more before i make a decision if u could post some pics or give up a good link it would be much appreciated thanx in advanced*th-up*

[jeremy]

rieger infinity I:
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20Inf1/61-02.jpg
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20Inf1/K02-070.jpg

rieger gts:
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20GTS/016.jpg
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20GTS/365.jpg

rieger genesis:
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20Genesis/369.jpg
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20Genesis/370.jpg

reiger e46 m3:
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20GTS/DSC_0033.jpg
http://www.rieger.nl/images/autos/bmw/BMW%20E30%20GTS/DSC_0036.jpg

[snd84318i]

jeremy all those kits can be fitted on an 84 ? would you need to do some modifications to them to fit ?

[Jase]

dont forget the mtechII. It will require some retrofitting if your car is older then 89

[jeremy]

autovogue av3:
http://www.autovogue-commerce.co.uk/productimages/802.jpg
http://www.autovogue-commerce.co.uk/productimages/805.jpg

lumma cl1:
http://www.bmheaven.co.uk/e30_1f.art

seidl:
http://www.bmheaven.co.uk/e30_fron.art
http://www.bmheaven.co.uk/e30_heck.art


mtech:

[Jase]

Somebody may have some shots of seidi or lumma kits

[Jase]

damn in the time I posted that Jeremy is in there like a fat kid on a smartie..:D

[jeremy]

bmp rs1:
http://www.bmpdesign.com/assets/productfoto/rsfront.jpg
http://www.bmpdesign.com/assets/productfoto/rskitre.jpg
http://www.bmpdesign.com/assets/productfoto/e30side.jpg

breyton:

[jeremy]

a member on our board by the name of "eurostyle" also makes an e36 m3 kit with a molded lip and rieger rear for the e30

http://maxbimmer.com/forums/attachment.php?s=&postid=142579

[jeremy]

Originally posted by snd84318i
jeremy all those kits can be fitted on an 84 ? would you need to do some modifications to them to fit ?

yes, they will fit.....

and yes, you will need to do some modifications.....

*th-up*

[jeremy]

personal opinion..... looks alone, go for the av3 *th-up* *th-up*

[BladeRunner]

its funny how this same request comes up every month or two.

[Jase]

Ya but most of us have asked the same old questions before too.

[punnzzells]

Go for the Breyton... it's the cleanest looking kit.... anyone know where to grab one?

Mike.

[jeremy]

Originally posted by punnzzells
Go for the Breyton... it's the cleanest looking kit.... anyone know where to grab one?

Mike.

www.bmpd.com call them

[djcontra]

Infinity 1, but with different side skirts

[burnhard22]

I like Reiger. I am quite happy with the quality and look over some fiberglass kits-they tend to crack easily. Reiger is not fiberglass.
Thanks
p.s It all comes down to personal preference.
p.s.s Just like most all guys like girls compared to E46lover who like????

[Eurostyle]

[QUOTE]Originally posted by burnhard22
[B]I like Reiger. I am quite happy with the quality and look over some fiberglass kits-they tend to crack easily. Reiger is not fiberglass.

Onece again, just because its a Rieger does NOT mean its not fiberglass, and it does not mean its bad quality! The GTS and Genesis kits are all very high qualits fiberglass products and are original Rieger!

[Jase]

Lots of meat on fil's kits.It will hold up. Plus if it cracks it can be repaired. ABS kits are a bitch to get fixed. Big $$ too

[biotek]

Originally posted by jeremy
a member on our board by the name of "eurostyle" also makes an e36 m3 kit with a molded lip and rieger rear for the e30

http://maxbimmer.com/forums/attachment.php?s=&postid=142579

i love that M3 kit *th-up* *th-up*

Oh and for the haters of fiberglass :moon:

[Digitalwave]

I think all Rieger kits are fiberglass, except the Infinity I lip. I have the Infinity I lip, its flimsy ABS plastic, and I have broke it once. I fixed it myself with fiberglass.

Most of the kits posted so far will fit an 84, except for the M-tech II and the Rieger Infinity I. They are also almost all fiberglass and should be fitted by a professional since fiberglass kits have flaws 99% of the time.

[Jase]

I dont think anyone makes a direct fit mtechII for a pre 87. they can be made to fit. But again that is extra money .

[320iCab91]

Originally posted by biotek
i love that M3 kit *th-up* *th-up*

Oh and for the haters of fiberglass :moon:

The rieger E46 M3 looh kit is made by ASB plast look here :
http://www.maxbimmer.com/forums/showthread.php?s=&threadid=28824

[biotek]

i like the e36 m3 kit better

[jeremy]

if you install a fiberglass kit PROPERLY, you shouldn't have any problems....

abs plastic is alittle more ridgid, but it is also alot harder/expensive to fix...and the majority of the time, it is repaired using fiberglass...

fiberglass is easier to work with, more flexible and easy and cheap to fix....

[jeremy]

keep in mind, i am talking about a well made fiberglass kit.....

[djcontra]

Originally posted by jeremy
a well made fiberglass kit.....

...aka a eurostyle kit *th-up*

[jeremy]

Originally posted by djcontra
...aka a eurostyle kit *th-up*

i have no idea.....i have never used one of his kits.....i have heard very good things about them and have seen them first hand, and they DO appear to be very good..

hopefully if fil makes a certain kit we were talking about, i will suit up with a eurostyle kit next year !

[Jase]

Ah the mystery kit?

[jeremy]

Originally posted by Jase
Ah the mystery kit?

no mystery, i just don't want to say incase he doesn't end up making it.... *th-up* ....no need to get peoples hopes up ...

[djcontra]

Originally posted by jeremy
no mystery, i just don't want to say incase he doesn't end up making it.... *th-up* ....no need to get peoples hopes up ...

I really don't know but, is it a rieger infinity 1 kit for e30?

[jeremy]

Originally posted by djcontra
I really don't know but, is it a rieger infinity 1 kit for e30?

e36 m3 front with infinity lip

[Digitalwave]

Originally posted by djcontra
I really don't know but, is it a rieger infinity 1 kit for e30?

Rieger already makes an Infinity kit for E30's.

[jeremy]

Originally posted by Digitalwave
Rieger already makes an Infinity kit for E30's.

we're talking about a local kit builder *th-up*

[djcontra]

jeremy,
that should look hot! Keep the gts rear bumper though.

[jeremy]

Originally posted by djcontra
jeremy,
that should look hot! Keep the gts rear bumper though.

yup....and i cant decide if i should flare the arches into the gts sides or go with the m3 sides:confused:

i'm leaning toward the gts w/arches

[djcontra]

i'm not crazy about the m3 sideskirt look on the e30 for some reason.
What about seidl sideskirts? It looks like it has the lines to match the angles of the rieger lip up front, and the gts rear.
(not that great of a pic, but you can sorta see the side skirts)
http://www.tuning-bmw.ru/seidl-e30-1.jpg

[jeremy]

^ that's actualy an awesome idea..... i totaly never really even noticed the seidl side skirts.....when you look at that pic, it's hard to notice anything except the rear skirt :)

[Digitalwave]

Originally posted by jeremy
we're talking about a local kit builder *th-up*

My bad!

[jeremy]

^ it's all good :)

[jeremy]

damn ! the only place i could find that sells seidl in the states or canada is this place.....i think they're on crack ! 399 us for side skirts *thmbsdwn*