PDA

View Full Version : angel eyes?


SebSter
02-11-2004, 12:16 AM
http://www.dtmpower.net/forum/showthread.php?s=&threadid=123734

so whats the word on these?

http://members.roadfly.com/e30rules/P1010084.jpg

Lil'Smoothie
02-11-2004, 12:32 AM
you need euro ellipsoids for em dogg

SebSter
02-11-2004, 12:41 AM
are they custom made? i figured they were sold like that as a whole :confused:

BMW BMXer
02-11-2004, 12:42 AM
I never had any. Whatever anyone tells you is a myth.:P

Lil'Smoothie
02-11-2004, 12:52 AM
They (Hella) are just coming out with the whole unit now
rings plus ellipsoids, it'll be in stores soon, prolly like 600 canadian tho

or you can buy euro ellipsoids for a hundred or so and bye the kit for another 150 and do it yourself

the euro ellipsoids come apart so the angel eyes can be installed inside, than you just gotta wire them up

that pic you posted is mostlikely a do it yourself job...
it looks good tho

Skunk#1
02-11-2004, 01:21 AM
http://www.lowendesign.com/ they have them for 300usd

BladeRunner
02-11-2004, 01:40 AM
acorrding to my lastest catelogue bavarian autosport sells angel eyes for e30. not sure on the quality i guess i should call a rep. one day but they prob. lie to make a sale. no offense just my assumption.

jeremy
02-11-2004, 02:24 AM
ok, ok.....here is the deal....

the kits you CAN buy require you to use stone guards....the rings will NOT be enclosed in the lamps...rather on the outside and then you will have ugly stone guards on top to protect them.
(see pic)
http://www.bmpdesign.com/assets/productfoto/stngrd3.jpg


the picture shown is of the euro smoked lamps which can be opened IF you bake them in the oven to losen up the adhesive seal......by doing this, you could place the rings behing the lamp lense, you could also blow your lamps up in the process..... 50/50 chance.
(see pic)
http://members.roadfly.com/e30rules/P1010084.jpg


hella is not coming out with a set for the e30. they do have a set for the e36, called the "celis".

mts was supposed to produce a set, but have pushed back the release date countless times....in other words, dont hold your breath.
(see pic)
http://www.nikis-place.com/pics_items/31000/31001.jpg

notmpowered
02-11-2004, 02:26 AM
i thought everyone on the net knew by now not to buy from lowendesign.

jeremy
02-11-2004, 02:28 AM
Originally posted by notmpowered
i thought everyone on the net knew by now not to buy from lowendesign.

you would think, wouldnt you.....

go on his site and look at the "product install" section....GEE isn't that dave/m50e30's car ?!?!

Jase
02-11-2004, 02:29 AM
Originally posted by BMW BMXer
I never had any. Whatever anyone tells you is a myth.:P
So are yours just on the outside of the lenses?

Skunk#1
02-11-2004, 03:05 AM
the one from um*nitza dont seem bad and they look cool in the vid on his site, dont know about the prices.

BMW BMXer
02-11-2004, 03:40 AM
Originally posted by Jase
So are yours just on the outside of the lenses?

Ya they were. They took to much light from the low beams and they were not that bright. Apperently you can open sealed but its super hard so I just took em off.

BLAGUSS
02-11-2004, 03:41 AM
that is a bit expensive upgrade for oldish E30. I like them a lot!

BladeRunner
02-11-2004, 10:00 PM
angle eyes would go great with an e30 body kit though. couldn't you just take the lights from a 5er or e36 do a few mods and have them running in and e30? somone on here was talking about this. I asked him/her if rewiring was a ness. never received a reply :(.

Sylak
02-12-2004, 04:11 AM
I wish i have those on my car... it will be expensive thought

Bas325
02-13-2004, 10:35 AM
Hi,

Could some tell me why I should not buy at low and design.

I missed the thread about this.

Bastiaan

Skunk#1
02-13-2004, 10:02 PM
i am curious too.

Jase
02-13-2004, 10:45 PM
So I am assuming that the stock 89 projectors dont open. Do all smilies open?